Dreamline ENIGMA SHDR-60727912 Series Manuale di istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Prodotto idraulico Dreamline ENIGMA SHDR-60727912 Series. Dreamline ENIGMA SHDR-60727912 Series 17. Shower door
Stampa la pagina1. Prior to installation, examine all boxes and packages for shipping damage and compare the
piece count with your packing slip. After opening all boxes and packages read this
introduction carefully. Check that all of the needed parts are included in the package by
checking off the components on the "Detailed Diagram of Shower Door Components". If the
unit has been damaged, has a finishing defect, or has missing parts, please contact our
customer support department within 3 business days of the delivery date. Please note that
DreamLine
will not replace any damaged products or missing parts free of charge after
®
3 business days or if the product has been installed. Feel free to contact DreamLine
have any questions and please provide an order number, job name or other proof of purchase
to help us identify your original order.
2. Please note that you should consult your local building codes with questions about
installation compliance standards. Building and plumbing codes may vary by location,
and DreamLine
will not accept any returns.
3. If this unit is going to be installed in a new construction, please, install all of the required
plumbing and drainage before installing the shower. Use a competent and licensed (if
required by local code) plumber for all plumbing installation.
4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and
will be able to support the total weight of the unit. Also make sure the walls are at right angles.
Irregular installation surface level, radius corners or improper angle of side walls will result in
serious problems for your installation. Please, note that some adjustments and drilling might
be necessary during the installation process.
5. Please protect all primary surfaces of the product during installation. Never set your glass
down directly onto a tile floor. Leave corner protectors in place until necessary to remove them.
Always use a piece of wood or cardboard to protect the bottom edge and corners of the glass
prior to and during installation.
6. This unit must be installed upon a solid threshold and against finished walls.
7. Please, NOTE! This door does not have out-of-plumb adjustment. Make sure your walls
are at right angles.
8. This door requires a 3-1/2" wide threshold or installation space.
9. Please note that Step #9 calls for installation of the door to the wall using anchors.
However, the manufacturer strongly recommends installing these heavy doors to the
studs or to preinstalled 2x6 wood reinforcements behind the wall and attaching the Wall
brackets to it.
10. a) If the model width of your door is 60", you only need to refer to (Diagram A) with
(Packing List A).
b) If the model width of your door is 72", and you are installing the door with the additional
small stationary glass, you need to use (Diagram A and B) with (Packing List A and B) to
complete the installation.
11. Note: The installation of this unit requires that you drill down into the threshold.
12.
Attention: This door is extremely heavy and requires professional installation with
2 installers.
"Enigma" Ver.4 Rev.5 02/2016
is not responsible for code compliance standards for your project and
®
Preparation
if you
®
2