Andersson PCM 2.0 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Cremagliere e cavalletti Andersson PCM 2.0. Andersson PCM 2.0 10. Projector ceiling mount

Special mounting: Philips projectors

Attach adapter part B

(10) to the projector.

Use the ceiling plate (1) as a template and mark 3 mounting holes on the

ceiling. Pre-drill these holes with an 8mm masonry bit to a least 50mm in

depth. Insert a concrete anchor (15) into each of these holes. Attach the

ceiling plate (1) to the ceiling using 3 lag bolts (14) and washers (16).

(1 4)

Join the plate extension pipe to the

ceiling plate and push the two upper

bolts at the same time. Which extension

pipe to choose depends on the height

of your ceiling.

Use the Allen key (13) to tighten

the bolts from the outside for

maximum safety.

Join the projector plate to the extension pipe by pressing the two

lower bolts on the projector mount, and at the same time sliding

the upper part of the bracket into the extension pipe. Tighten the

bolts from the outside for maximum safety, use the Allen key (13).

(10)

Fasten the projector

arms (5), using screws

with washer (17).

Hardwood ceiling

Use the ceiling plate (1) as a template and mark 3 mounting holes

on the ceiling. Attach the ceiling plate (1) to the ceiling using 3 lag

bolts (14) and washers (16).

Note: Do not use any concrete anchors when mounting the

bracket onto a hardwood ceiling.

(17)

! !

Converge the arms to the

centre and fix the arms to the

bottom of the projector plate

by using M6 screws (7), and

washers (11) and (16).

(7 )

Fix the screws.

(15)

(14)