Carol-Ann Custom Amplifiers OD-2 Series Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Amplificatore Carol-Ann Custom Amplifiers OD-2 Series. Carol-Ann Custom Amplifiers OD-2 Series 11. 50w & 100w amplifier

Stampa la pagina

Front Panel

1.
Input Jack – Guitar input jack.
2.
Sparkle Switch – Adds upper harmonics to both Channels.
Shift Switch – This switch is used to change the gain and the range of the tones controls on Channel A. In the up
position, the channel has more midrange and gain, in the down position it is a much flatter response with less gain.
3.
Pre-Gain – This control sets the overall input gain for both Channels. Settings between 11 and 2 O'clock are typical.
4.
Drive – This control sets the amount of Overdrive present in Channel B.
5.
Treble - Controls the higher frequency content.
6.
Middle – Controls the mid frequency content.
7.
Bass - Controls the bass frequency content.
8.
CH A Master – This control sets the overall volume of Channel A.
9.
CH B Master – This control sets the overall volume of Channel B.
10.
Presence – This control sets the overall high frequency content for both Channels.
11.
Power Indicator – Illuminates when power is applied to the amplifier.
Page 5 of 11