Andesfit Health ADF-B825 Manuale di istruzioni

Sfoglia online o scarica il pdf Manuale di istruzioni per Bilance Andesfit Health ADF-B825. Andesfit Health ADF-B825 3. Electronic body scale

Stampa la pagina

Model ADF-B825

Electronic Body Scale

General Operation

1. This scale operates on 4"AA" batteries, which are included. Please see

"Battery Installation" section of this manual for installation instructions. Also,

some models have a static cling label on the lens to prevent scratching.

Please remove before use.

2. Your scale has been set at the factory to read weight in pounds (lb). You

may select kilograms (kg) or stone (st lb) (1 stone = 14 pounds) units of

measurement by pressing the "kg-lb-st" button on the bottom of the scale.

3. Place scale on flat, hard surface. Carpeted or uneven floors may affect

accuracy.

4. Step on the scale (disregarding the reading) and step off. This process

insures the scale is set and is now ready for use. Do this whenever the scale

is moved. At all other times step straight onto the scale.

5. Step onto the scale platform and remain still. The display will count up to

your weight. The scale display will flash thrice when the weight is locked.

Your weight is now displayed.

6. The scale will turn off automatically.

INSTRUCTION MANUAL

Battery Installation

1. Use AA batteries (included. Remove any plastic wrap from the batteries

before proceeding). Always replace all batteries at the same time; do not combine

old and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-

Cadmium (rechargeable) batteries.

2. Open the battery compartment on the bottom of the scale.

3. Place the new batteries into the battery compartment according to the polarity

illustration in the compartment.

4. Replace the battery compartment cover.

NOTE: Please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. As with all small items, do not let

children handle batteries. If swallowed, seek medical attention immediately.

the battery if the scale will not be used for a long period of time.

Low Battery

Your scale is equipped with a low battery indicator. It will display "Lo" or

readings will grow dim or become irregular if the batteries need replacement.

Trouble Shooting

1. Place your feet in the same position every time you weigh yourself. Stand still during

measurement.

2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.

3. Move the scale to a location where it won't be bumped. If your scale is bumped

while being activated or while in use, an inaccurate reading may occur.

4. For the most consistent readings, weigh yourself at the same time of day. Allow for

weight fluctuations due to food or drink in your system.

5. The maximum capacity of this scale is 550 lbs / 250 kgs / 39 st 4 lbs. Should "Err "

appear on the display during a weighing, this indicates that the maximum weighing

capacity of the scale has been exceeded. Remove the weight immediately;

otherwise, permanent damage may occur.

Warning indication

 LCD display means overload.

Err

 Lo means power not enough.