DREAMS FRANCIS OTTOMAN Manuale di istruzioni per il montaggio - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni DREAMS FRANCIS OTTOMAN. DREAMS FRANCIS OTTOMAN 11. Electric lift up bed
Anche per DREAMS FRANCIS OTTOMAN: Montaggio (12 pagine)
Stampa la pagina
Fittings Checklist
Code
Description
Bolts (M8x30mm) for
A
fitting side rails (3&4) to
headboard & footboar d (1&2)
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
HARDWARE FOR FITTING MATTRESS BASE BOARDS (PACK B)
Code
Description
Bolts (M8x30mm) for fitting
and
support bars
metal
A
connecting plates (J)
mattress base boards (5&6).
B
Spring Washers (for M8 bolts)
HARDWARE FOR FITTING MOTOR GUARD PANELS (PACK C)
Code
Description
Bolts (M8x30mm) for
A
fitting
motor guard panels
Side Rail (3&4) and Headboard (1)
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
Additional Tools Required
Crosshead Screwdriver
General Hints & Tips
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
A ssembly requires two persons.
1.5 Hrs
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
to
to
Approximate time to
assemble this product
Qty
Code
Description
x16
D
Allen Key (for M8 bolt)
x16
Bolts (M8x60mm) for
fitting feet (12&13) and fitting
H
mattress base support rails (9) to
headboard & footboard (1&2).
x24
Qty
Code
Description
C
x16
Flat Washers (for M8 bolts)
Metal Plate for connecting
J
x8
both mattress base
boards together (5&6).
Qty
Code
Description
x8
K
Plastic Barrel Nuts
Screws (5x50mm) for
x8
L
assembling motor guard
panels.
x8
In the unlikely event of missing or damaged parts, please
contact the customer service team on 0344 292 00 00.
When calling this number, please quote the part code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
Intersecting
Hole
Page 2 of 11
Care & Maintenance
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
We recommend the bed is
assembled in the room it shall be
located in.
Qty
x1
x8
Qty
x16
x2
Qty
x4
x4