DREAMS FRANCIS OTTOMAN Montaggio - Pagina 2
Sfoglia online o scarica il pdf Montaggio per Arredamento per interni DREAMS FRANCIS OTTOMAN. DREAMS FRANCIS OTTOMAN 12. Electric lift up bed
Anche per DREAMS FRANCIS OTTOMAN: Manuale di istruzioni per il montaggio (11 pagine)
Stampa la pagina
Fittings Checklist
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
Code
Description
Bolts (M8x30mm) for
A
fitting side rails (3&4) to
headboard & footboar d (1&2)
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
HARDWARE FOR FITTING MATTRESS BASE BOARDS (PACK B)
Code
Description
Bolts (M8x30mm) for fitting
and
support bars
metal
A
connecting plates (J)
mattress base boards (5&6).
B
Spring Washers (for M8 bolts)
HARDWARE FOR FITTING MOTOR GUARD PANELS (PACK C)
Code
Description
Bolts (M8x30mm) for
A
fitting
motor guard panels
Side Rail (3&4) and Headboard (1)
B
Spring Washers (for M8 bolts)
C
Flat Washers (for M8 bolts)
Additional Tools Required
Crosshead Screwdriver
General Hints & Tips
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
A ssembly requires two persons.
1.5 Hrs
Qty
x16
x16
x24
Qty
to
Qty
to
Approximate time to
assemble this product
Page 2 of 12
Code
Description
D
Allen Key (for M8 bolt)
17mm Spanner for M10 Motor Nut
E
Bolts (M8x60mm) for
fitting feet (12&13) and fitting
H
mattress base support rails (9) to
headboard & footboard (1&2).
Code
Description
C
x16
Flat Washers (for M8 bolts)
Metal Plate for connecting
x8
J
the mattress base boards
together (5&6).
Code
Description
x8
K
Plastic Barrel Nuts
Screws (5x50mm) for
x8
L
assembling motor guard
panels.
x8
In the unlikely event of missing or damaged parts,
please contact the customer service team on;
0344 292 00 00. When calling this number please
quote the part code reference numbers shown in this
leaflet, when requesting spare or replacement parts.
Intersecting
Hole
Care & Maintenance
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
We recommend the bed is
assembled in the room it shall be
located in.
Qty
x1
x1
x8
Qty
x16
x2
Qty
x4
x4