ATL Berkshire RD Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Telefono ATL Berkshire RD. ATL Berkshire RD 4. Atl berkshire rd telephone user guide
Stampa la paginaPreparing to use your
Berkshire RD
INITIAL ChECK
Our telephones are checked, tested and leave us
in perfect condition. If yours is damaged, please
return it to your supplier with proof of purchase, for
a replacement.
TELEPhONE NUMBER LABEL
The telephone incorporates a label underneath the
handset for recording frequently used telephone
numbers. To remove the plastic cover, operate
the release clip with your thumb nail and hinge
upward.
CONNECTION
The Berkshire RD telephone can be connected
either to a Direct Exchange Line, or as an extension
to a compatible company exchange (PABX).
hANDSET CORD
This cord will require connection between the
telephone and handset. Take any end of the handset
cord, and locate the port marked 'hANDSET' on
the left hand side of the Berkshire RD, and simply
push to locate. Connect the other end to the base
of the handset to complete.
LINECORDS
The Berkshire RD arrives with two line cords for
customer selection. Select your required linecord
(standard BS6312 BT-socket, or RJ45 socket for
category 5 installations). The rear of the telephone
has a port marked 'LINE', plug your selected
linecord into this port first, and the other end to
your telephone line termination point. An RJ11 line
cord is available as an option, ask your supplier
for details.
WALL AND DESK MOUNTING KITS
A wall or desk mounting kit is available as an
option, please contact your supplier for further
information.
Using your Berkshire
RD with the Handset
RECEIvING CALLS
Incoming calls will be announced by the audible
ringer and flashing LED. To answer the call, simply
lift the handset.
ADJUSTING YOUR RINGER-vOLUME
The ringer volume is controlled by a 3 position
switch located at the rear of the telephone, and
indicated by the word 'ringer'. Moving through the
settings from left to right they are hIGh, MED and
LOW.
ADJUSTING YOUR RINGER PITCh
The ringer pitch control is also a 3 position switch
located at the rear of the telephone, and indicated
by the words 'RINGER PITCh'. Settings from left
to right are hIGh, MED and LOW.
MAKING A CALL vIA ThE hANDSET
►
Pick up the handset and listen for dial tone
►
Dial one of the preset memories
EMERGENCY CALLS
Please Note, as supplied, this product does not
provide the facility for dialling the Emergency
Services on 999 or 112 without the customer
requesting one of the Preset Memory Codes, i.e.
#201, #203 etc, to be 999 or 112 on their PABX.
It is possible for one of the Memory Buttons of
this product to be customised with associated
printing, for the Emergency Services, but this must
be requested at time of order placement by the
customer and maybe subject to a Programming /
Printing charge.