Bosch GSB 13 RE Manuale di istruzioni originale - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni originale per Trapano Bosch GSB 13 RE. Bosch GSB 13 RE 9. Cordless impact drill bosch gsb professional 13/ 13 re/ 16/ 16 re
Anche per Bosch GSB 13 RE: Manuale di istruzioni per l'uso (18 pagine), Istruzioni originali (37 pagine), Manuale di istruzioni originale (12 pagine), Manuale di istruzioni per l'uso (19 pagine), Manuale di istruzioni per l'uso (13 pagine), Manuale di istruzioni originale (16 pagine)
Stampa la pagina
12 | English
Safety Warnings for Drills
Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
1 609 92A 2B1 | (14.3.16)
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 "Drilling/Impact Drilling" selector switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Thumbwheel for speed preselection
(not for machine version 3 601 B17 103)
8 Rotational direction switch
9 Button for depth stop adjustment
10 Wing bolt for adjustment of auxiliary handle
11 Auxiliary handle (insulated gripping surface)*
12 Depth stop*
13 Chuck key*
14 Key type drill chuck*
15 Universal bit holder*
16 Screwdriver bit*
17 Hex Key**
18 Open-end spanner**
19 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
Technical Data
Impact Drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Impact rate
Rated torque
Right/left rotation
Spindle collar dia.
Max. drilling dia.
– Brickwork
– Concrete
– Steel
– Wood
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
GSB 13 RE
3 601 B17 1..
W
600
W
301
-1
min
0 – 2800
-1
min
1570
-1
min
25070
Nm
1.8
mm
43
mm
15
mm
13
mm
10
mm
25
Bosch Power Tools