andover SONGBIRD Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Convertitore multimediale andover SONGBIRD. andover SONGBIRD 6. Internet music streamer

LED flashes quickly. The voice prompt will say "ENTERING SET-

UP MODE". If no action is taken after 35 Seconds, the LED will

flash slowly and the action will need to be repeated.

Open your Smartphone's WiFi menu and look for "Songbird", or

"XRD-Flybox". Select this as your WiFi Network.

Open the Songbird app and when prompted choose "ADD

DEVICE". Follow the prompts from within the app to complete

setup.

When setup is complete, your phone will return to your original

WiFi network settings and Songbird will be ready for use.

Basic Operation

Now that Songbird is set up and connected to your network, it will appear in

the DEVICE LIST page of the app.

Touch the device icon to enter the CONTROL PAGE for that

device.

Touch the upper left corner of the CONTROL PAGE to enter the

SOURCE PAGE. Your available sources will appear on this page.

Select your source and follow the instructions for that source.

For SPOTIFY, Songbird may be accessed directly from within the

Spotify app. Select "Devices Available", then touch the Available

Devices icon

choose during setup on the next page.

Select "Bluetooth" within the Songbird app, or press the WPS/Input

button on Songbird repeatedly until the LED turns Blue.

Go to the Bluetooth menu on your device and choose "Songbird" or

"XRD-Flybox". The device will display "Connected" if successful. Once

connected you can play from your device as you would with any Blue-

tooth speaker. Some apps may require that you choose the desired

Bluetooth device from within the app as well.

If you subsequently wish to connect to a different device, you must first

disconnect the original device from Songbird from within that device's

menu.

on the lower left corner. Select the name you