Compac WD800 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di servizio Compac WD800. Compac WD800 9. Wheel dolly

Instruction Manual

Operating manual & service instructions for wheel dolly type

WD800 - Capacity 800kg.

Important: Read and understand this manual before use!

Instruction / Responsibility:

This instruction must be enclosed to the wheel dolly, hereafter mentioned as WD

It is very important that the owner and the operator completely understand the operating manual and

all its safety warnings before operating the WD. It is important that the user has comprehended all

instructions before use. The manufacturer of WD is not liable for damages caused to people or things

due to wrong- or irresponsible use of the WD. If the operator is not fluent in English, the product

instructions and warnings shall be read and discussed with the operator in the operator's native

language, making sure that he understands its contents.

Mounting:

Open the packages and check that the product has no damages caused by transportation and that all

parts are enclosed. The packing material is to be recycled or used again. Before operating the WD

replace the oil plug (A) with the oil plug (B) with hole for bleeding (fig. 1). The oil plug (A) is for

transport ONLY!

Operating instruction:

The WD is operated by activating the pump lever. The arm is lowered again by turning the release

handle slowly counter-clockwise. (fig.2) The release-handle is spring-loaded due to safety reasons.

WARNING Safety instructions:

Do not overload the WD! Overload could result in damage to the WD or in worst case cause

accidents! Before lifting / transporting a load the operator MUST take precautions that the load is not

allowed to drop, and that the weight distribution is safe. The operator must before use take

precautions that all pins are safely locked with split pins or lock rings.

(ATTENTION! The LOAD must be blocked with the supplied chain.)

This WD is to be used at level and solid ground only.

Always lower the load to the lowest possible position before transportation.

Important! The safety valve is calibrated and sealed by the manufacturer and it is ABSOLUTELY

PROHIBITED To open the seal or adjust its calibration. Offence against the above safety instructions

could in worst case result in loss of the load which could cause personal injury and/or damage to the

WD or properties. In case the WD has any irregularities which could affect the safety, the WD must

not be operated until it has been repaired.

Maintenance:

At normal use all mechanical/moving parts only requires a monthly lubrication to be maintained.

The pins must be greased every three months.

Important! Use only oil or grease free from acid.

An annual inspection must be performed by a skilled person. Every eventually wearing out or

defective part must be replaced with original spare parts. The owner and- or user must take

precautions that repair is made by a skilled person. Before every use the operator must take

precautions that there are no visible faults such as leaks, damage of the WD and loose or missing

parts.

In case the operator suspects that the WD has been overloaded or wrongly loaded it must before

further use be inspected by a skilled person or an authorized.