AirTech Air+ PIV Istruzioni per l'installazione e la messa in funzione - Pagina 9
Sfoglia online o scarica il pdf Istruzioni per l'installazione e la messa in funzione per Ventilatore AirTech Air+ PIV. AirTech Air+ PIV 16. Positive input ventilation unit
Anche per AirTech Air+ PIV: Istruzioni per l'installazione e la messa in funzione (16 pagine)
Stampa la pagina
WARNING: If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard
Ensure the local AC power supply is isolated.
The product has a pre-wired flying lead.
blue core to Neutral.
Use cable clamps and clips to secure the cable, as appropriate.
IMPORTANT:
In order to have the product
switch off in the event of a fire
it must be wired using a smoke
alarm with a relay system.
Use Fig.9 as a reference and
refer to the instructions
provided by the manufacturer of
the smoke alarm and relay in
order to wire the unit correctly.
D. START UP SEQUENCE
When the unit is switched on it will first run through a period of system checks.
During this time the display will show various system parameters before the fan motor
starts. After 10 seconds the product will be ready for commissioning.
E. COMMISSIONING
Accessing the Commissioning Menu
If the fan is powered and the display is not lit then press any button to access the
menu. After 20 seconds without menu activity the display will switch off; any new
settings will then be applied.
There are three buttons on the front of the unit:
Fig.9
-
+
9
Connect the brown core to Live and the
FOR REFERENCE ONLY
Air+ PIV
Unit
SET