Dresser iCIP 4000 Series Manuale delle procedure di installazione e funzionamento - Pagina 14
Sfoglia online o scarica il pdf Manuale delle procedure di installazione e funzionamento per Pompa dell'acqua Dresser iCIP 4000 Series. Dresser iCIP 4000 Series 14. Intelligent chemical injection pump
Stampa la pagina
Servicing
WARNING
- EXPLOSION HAZARD -
SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABILITY FOR CLASS 1, DIVISION 2.
ADVERTISSEMENT
- RISQUE D'EXPLOSION -
LA SUBSTITUTION DE COMPOSANTS PUET
RENDRE CE MATERIEL INACCEPTABLE POUR LES
EMPLACEMENTS DE CLASSE 1, DIVISION 2.
WARNING
- EXPLOSION HAZARD -
DO NOT REPLACE ANY COMPONENT UNLESS POWER
HAS BEEN SWITCHED OFF OR THE AREA
IS KNOWN TO BE NON-HAZARDOUS.
ADVERTISSEMENT
- RISQUE D'EXPLOSION -
COUPER LE COURANT OU S'ASSURER QUE
L'EMPLACEMENT EST DESIGNE NON DANGERUEX
AVANT DE REPLACER LE COMPOSANTS.
WARNING
- EXPLOSION HAZARD -
DO NOT DISCONNECT EQUIPMENT UNLESS
POWER HAS BEEN SWITCHED OFF OR THE AREA
IS KNOWN TO BE NON-HAZARDOUS.
ADVERTISSEMENT
- RISQUE D'EXPLOSION -
AVANT DE DECONNECTER L'EQUIPEMENT, COUPER
LE COURANT OU S'ASSURER QUE L'EMPLACEMENT
EST DESIGNE NON DANGEREUX.
Industrial Products Group
Dresser, Inc.
16240 Port Northwest Drive
Houston, Texas 77041-2645 USA
Ph: 832.590.2306
Toll Free Phone: 800.945.9898
©2008 Dresser, Inc.
Texsteam, and DRESSER are registered trademark(s) of Dresser, Inc.
Fax: 713.849.2879
Email: [email protected]
Emergency field repairs by Authorized service technicians
are strongly advisable. Repairs made by un-Authorized
technicians will void any warranty. To assure safety of
equipment and personnel, only Dresser recommended
replacement parts shall be installed. And above all,
disconnect power from the iCIP
Damage to wiring and operating equipment may be avoided
with careful reviewing the operating and installation
procedures document by qualified personnel. At all times,
operating safety of electrical equipment is imperative to
avoid injury to personnel.
IMPORTANT
Read this instruction document with special attention to
warnings, cautions and safety concerns. FAILURE TO
ADHERE TO THESE INSTRUCTIONS COULD RESULT IN
SAFETY HAZARDS WHICH MAY RESULT INJURY TO
PERSONNEL, MOTOR/CONTROLLER DAMAGE OR OTHER
ELECTRICAL EQUIPMENT. Doubts or reservations with
regards to installations or maintenance with reference to
connecting your "Solar Powered" Chemical Injection Pump
system should refer to the detailed sections supplied in this
manual. For additional instruction, classification or
assistance, contact an authorized Service Center.
WARNING
Avoid personnel injury involving equipment that is in
motion. Always remove or disconnect power prior to
service to the motor, motor controller, batteries, charge
controller, solar panels.
™
before servicing.
www.dresser.com
Solar Solutions IOM
7.08