Electrolux DBGL5430CN Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Cappa di ventilazione Electrolux DBGL5430CN. Electrolux DBGL5430CN 29.

www.electrolux.com

4. CONTROLS

Button Function

Turns the lights on/off at maximum strength.

Turns the motor on/off at speed one.

Turns the Motor on at speed two.

Press and hold the button for approximately 3 seconds, with

all the loads turned off (Motor and Lights), to turn the Activated

Charcoal Filter alarm on. The relevant LED flashes twice to confirm.

To turn the alarm off, press the button again and hold for at least

3 seconds. The relevant LED flashes once.

Turns the Motor on at speed three.

Press and hold the button for approximately 3 seconds, with all

the loads turned off (Motor and Lights), to perform a reset. The

LED S1 flashes three times.

Turns the Motor on at INTENSIVE Speed.

This speed is timed to run for 6 minutes. At the end of this time,

the system returns automatically to the speed that was set before.

If it is activated with the motor turned off, the hood will switch to

OFF at the end of the time.

Press and hold for 3 seconds to enable the remote control,

indicated by the LED flashing twice.

Press and hold for 3 seconds to disable the remote control,

indicated by the LED flashing just once.

Signals the Metal Grease Filter saturation alarm, indicating that

it is necessary to wash the filters. The alarm is triggered after

the Hood has been in operation for 100 working hours. (Reset

see the parag. Maintenance).

When this is activated, it signals the Activated Charcoal Filter

saturation alarm, indicating that the filter must be changed;

the Metal Grease Filters must also be washed. The Activated

Charcoal Filter saturation alarm comes into operation after the

Hood has been working for 200 hours. (Activation and Reset see

the parag. Maintenance).

Led

Fixed.

Flashing.