Electrolux EFA90950 Manuale d'uso - Pagina 21

Sfoglia online o scarica il pdf Manuale d'uso per Cappa di ventilazione Electrolux EFA90950. Electrolux EFA90950 28. Electrolux cooker hoods brochure
Anche per Electrolux EFA90950: Caratteristiche (7 pagine)

Stampa la pagina

Fixing the Frame

• Loosen the two screws fastening the

lower chimney and remove this from

the lower fra me.

• Loosen the two screws fastening the

upper chimney and remove this from

the upper fra me.

If you wish to adjust the height of the

frame, proceed as follows:

• Unfasten the eight metric screws joining

the two columns, located at the sides

of the frame.

• Adjust the frame to the height required,

then replace all the screws removed as

above.

• Insert the upper chimney stack from

above, and leave it running free on the

frame.

• Lift up the frame, ﬁ t the frame slots

onto the screws up to the slot end

positions.

• Tighten the two screws and fasten

the other two screws provided with

the hood.

Before tightening the screws completely

it is possible to adjust the frame by

turning it. Make sure that the screws do

not come out of their seats in the slotted

holes.

• The frame mountings must be

secure to withstand the weight of

the hood and any stresses caused

by the occasional side thrust

applied to the device.

On completion, check that the

base is stable, even if the frame is

subjected to bending.

• In all cases where the ceiling is not

strong enough at the suspension

point, the installer must provide

strengthening using suitable plates

and backing pieces anchored to the

structurally sound parts.

INSTALLING THE COOKER HOOD

electrolux 21