Bosch 6 Series Manuale di istruzioni per l'installazione e l'uso - Pagina 5

Stampa la pagina

Bosch 6 Series Manuale di istruzioni per l'installazione e l'uso

Warning – Risk of burns!

The accessible parts become very hot when

■

in operation. Never touch hot parts. Keep

children at a safe distance.

Risk of burns!

The appliance becomes hot during

■

operation. Allow the appliance to cool down

before cleaning.

Warning – Risk of injury!

Components inside the appliance may have

■

sharp edges. Wear protective gloves.

Risk of injury!

Items placed on the appliance may fall

■

down. Do not place any objects on the

appliance.

Risk of injury!

The light emitted by LED lights is very

■

dazzling, and can damage the eyes (risk

group 1). Do not look directly into the

switched on LED lights for longer than 100

seconds.

Warning – Risk of electric shock!

A defective appliance may cause electric

■

shock. Never switch on a defective

appliance. Unplug the appliance from the

mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Risk of electric shock!

Incorrect repairs are dangerous. Repairs

■

may only be carried out and damaged

power cables replaced by one of our

trained after-sales technicians. If the

appliance is defective, unplug the appliance

from the mains or switch off the circuit

breaker in the fuse box. Contact the after-

sales service.

Risk of electric shock!

Do not use any high-pressure cleaners or

■

steam cleaners, which can result in an

electric shock.

Risk of electric shock!

Penetrating moisture may result in an

■

electric shock. Clean the appliance using a

damp cloth only. Before cleaning, pull out

the mains plug or switch off the circuit

breaker in the fuse box.

Important safety information

Causes of damage

Caution!

Risk of damage due to corrosion. Always

switch on the appliance while cooking to avoid

condensation. Condensate can produce

corrosion damage.

Always replace faulty bulbs to prevent the

remaining bulbs from overloading.

Risk of damage due to ingress of humidity into

the electronic circuitry. Never clean operator

controls with a wet cloth.

Surface damage due to incorrect cleaning.

Clean stainless steel surfaces in the direction

of the grain only. Do not use any stainless

steel cleaners for operator controls.

Surface damage due to strong or abrasive

cleaning agents. Never use strong and

abrasive cleaning agents.

Risk of damage from returning condensate.

Install the exhaust duct in such a way that it

falls away from the appliance slightly (1°

slope).

Risk of damage as a result of incorrect

loading of design elements. Do not pull design

elements.Do not place objects on the design

elements or hang objects from them.

Caution!

There is a risk of surface damage if you do not

peel off the protective film.Remove the

protective film from all parts of the appliance

before using the appliance for the first time.