Electrolux EFC 6550X Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Cappa di ventilazione Electrolux EFC 6550X. Electrolux EFC 6550X 11.

Stampa la pagina

IMPORTANT:-

The hood must always be disconnected from the

electricity supply before beginning any maintenance

work.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a

solution of water and mild washing up liquid.

• Never use corrosive, abrasive or flammable cleaning

products or products containing bleach.

• Never insert pointed objects in the motor's protective grid.

• Only ever clean the switch panel and filter grill using a

damp cloth and mild washing up liquid.

• It is extremely important to clean the unit and change the

filters at the recommended intervals. Failure to do so will

cause grease deposits to build up that could constitute a

fire hazard.

Metal grease filter

• The purpose of the grease filters is to absorb grease

particles which form during cooking and it must always be

used, either in the external extraction or internal

re-circulation function.

Attention: the metal grease filters must be removed

and washed, either by hand or in the dishwasher,

every four weeks.

Removing the metal grease filters

• Push it towards the back of the unit and then pull it down

and out. (Fig. 3)

Hand Washing

Soak grease filters for about one hour in hot water with a

grease-loosening cleaner, then rinse off thoroughly with hot

water. Repeat the process if necessary. Refit the grease

filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful

washing programme and highest temperature, at least 65°C.

Repeat the process. Refit the grease filters when they are dry.

When washing the metal grease filter in the dishwasher a

slight discolouration of the filter can occur, this does not have

any impact on its performance.

• Clean the inner housing using a hand hot solution only

(never use caustic detergents, abrasive powders or

brushes).

Changing the light bulb

Ensure the appliance is switched off before carrying out

maintenance, to avoid any possibility of electric shock.

Remove grease filter to replace lamp. Replace with 40W

(maximum) E14 candle lamp. (Fig. 4)

WARNING:-

Failure to observe the instructions on cleaning the unit

and changing the filters will cause a fire hazard. You

are therefore strongly recommended to follow these

instructions.

The manufacturer declines all responsibility for any

damage to the motor or any fire damage linked to

inappropriate maintenance or failure to observe the

above safety recommendations.

HOODS WITH HALOGEN LAMPS:-

If the halogen lamps need replacing, they must be

replaced by lamps with an aluminium reflector, never

dichroic lamps, to avoid unnecessary overheating in

the lamp holders.

maintenance and care

Fig. 3

Fig. 4