Drew & Cole REDI HEK-1700-4H Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Bollitore Drew & Cole REDI HEK-1700-4H. Drew & Cole REDI HEK-1700-4H 9. 220-240v 50/60hz 1850-2200w 1.7l
Anche per Drew & Cole REDI HEK-1700-4H: Manuale d'uso (20 pagine)
Stampa la pagina
USER GUIDE
1.
Place the kettle on a flat level surface.
2. The power cable is stored in the under side of
the kettle base, select the desired length of cable
ensuring it exits the base using the power cable
channel.
3. To fill the kettle, remove it from the base, open the
lid and fill with water. Ensuring the body and power
base remain dry and clean.
Note: DO NOT fill the kettle over the maximum level.
Make sure the lid is closed firmly before connecting
to power supply.
4. Place the kettle on the power base and connect to
power supply.
5. The cup display will inform you how much water is
present within the kettle
Note: Should you accidentally boil the kettle without
water, boil-dry protection will prevent the kettle from
boiling, the display will read E. Should you fill beyond
the max line overfill protection will prevent the kettle
from boiling, the display will read F.
1.
Press the "Power" to power on the kettle base.
Set the temperature by selecting the desired
temperature (from 60
C/ 70
o
2. The kettle will "beep" informing you it has started
to boil. It will "beep" again at the end of the
boiling cycle to inform you it has reached the
selected temperature. As the kettle cycles though
the temperatures a red light indicates current
temperature and blue light indicates selected
temperature. Once the kettle has reached the
desired temperature the boiling cycle will end.
At any time if you would like to top up the water
temperature you just need to press the power
button and select the desired temperature.
3. After boiling, lift the kettle from the power base,
press and hold the pouring lock and pour the water.
4. Note: Do not open the lid when pouring the water,
scald risk from hot water
5. Unplug the appliance while it is not in use, dry and
clean it, and then place it on the base.
C/ 80
C/ 90
C/ 100
C).
o
o
o
o
CARE & MAINTENANCE
1.
Always disconnect the kettle from the power outlet
before cleaning. NEVER immerse the kettle or power
base in water or allow moisture to come into contact
with these parts.
2. Exterior cleaning: wipe over the exterior of the kettle
with a soft damp cloth, and then wipe dry with a dry
cloth.
3. Note: DO NOT use chemical or abrasive cleaners to
clean inside the kettle.
4. Clearance of deposit: minerals in water may deposit
at the bottom of kettle, which will influence the
usability of the kettle. So periodical descaling is
needed. Please use detergents according to its
instruction. Or according to the following methods
with white vinegar.
5. Fill the kettle with 3 cups of white vinegar, and then
add water until it is over the deposit in the kettle and
allow it to stand overnight.
6. Empty the solution from the kettle. Fill the kettle
with clean water to the maximum level, discard after
boiling. Repeat for several times until there is no
remnants of vinegar.
7. When the kettle is in storage or not in use, do not
fold the power cord.