Aleratec 1:16 USB 3.0 Copy Tower 330110 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Duplicatore di dischi Aleratec 1:16 USB 3.0 Copy Tower 330110. Aleratec 1:16 USB 3.0 Copy Tower 330110 2. Usb duplicator
Stampa la pagina
Summary of Operation
Setup
1. Connect the USB 3.0 cable (included) to the USB port on the back of your
duplicator and to an empty USB 3.0 port on your computer. If you do not have
an available USB 3.0 port on your computer please see the section titled "USB
3.0 Host Adapter Installation" for information regarding the included USB 3.0
PCI Express dual port host adapter.
2. Check that the red Voltage Selector Switch on the back of the unit is set to the
proper voltage for your area.
3. Connect the included power cord to the power input on the duplicator and into
an available power outlet.
4. Insert the Aleratec 1:16 USB 3.0 Copy Tower Installation and Software CD into
an available CD/DVD drive of your computer.
5. Click on Install Aleratec USB Duplication Suite to install the duplication software.
6. Follow the on-screen prompts to complete the installation.
Data Copying
This section will introduce you to Data Copying. For complete details, please read the
Aleratec 1:16 USB 3.0 Copy Tower Software User Guide included on your Installation
and Software CD.
1. Choose "Data Copy Only" from the drop down menu of your Aleratec software
interface.
2. On the same screen, click "Add Files" to copy individual files or "Add Folder" to
copy an entire folder.
NOTE: Make sure that your selected data DOES NOT exceed the capacity of the
smallest flash drive that you are copying to. This will result in failure.
3. Click on the "Destination" tab to select each USB flash drive you want to copy to.
4. After selecting the destination drives, press "Start" to begin the duplication
process.
For best results we recommend reading the section titled "Port Training" on page
28 of the Aleratec 1:16 USB 3.0 Copy Tower Software User Guide included on your
Installation and Software CD.
Technical Support Addresses and Phone Numbers
• By e-mail: [email protected]
• By Telephone: 1-818-678-0484 – Skype: support.aleratec.com – or FAX: 1-818-678-0483
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday, excluding
U.S. holidays.
Please try to call from a phone near your computer system.
• Access is available 24 hours a day, 365 days a year, via: www.aleratec.com
© 2012 Aleratec, Inc.
9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A.
Specifications subject to change without notice.
USB 3.0 Host Adapter Installation
1. Turn off and unplug the power cable from the
back of your computer.
2. Remove the cover to access the internal
hardware of your computer.
3. Locate a free PCI Express slot and remove the
metal cover plate on the rear of the computer
case. (Your new USB 3.0 Host Adapter will fit
and work with any PCI Express slot whether it
is a x1, x4, x8 or x16 slot. Performance may
vary with each slot.)
4. When installing the USB 3.0 Host Adapter, make
sure to fasten the bracket as documented in
your computer manufacturer's documentation.
5. Be sure to connect the SATA power connector
from the power supply to the card as it does
require additional power to function properly.
6. Place the cover back onto your computer.
7. Reattach the power cable to your computer
and turn it back on.
Windows 7, Vista Driver Installation
1. Insert the Aleratec 1:16 USB 3.0 Copy Tower
Installation and Software CD into an available
CD/DVD drive of your computer.
2. Click on Install USB 3.0 Host Adapter Drivers
to install the drivers for your new USB 3.0 Host
Adapter.
3. Follow the on-screen prompts to complete the
installation.
Document Number:
330110_QSG_ENG_Rev-A