Electrolux FHWC3650RS Assistenza - Pagina 23

Sfoglia online o scarica il pdf Assistenza per Cappa di ventilazione Electrolux FHWC3650RS. Electrolux FHWC3650RS 28. Range hood with electronic controls

Stampa la pagina

Section 4: Component Removal

5． Remove four screws from the motor blower

installation bracket and remove bracket.

NOTE

1. Reinstall motor blower bracket and assembly

into range hood housing. Reconnect the

terminals into the PCB control board

connectors according to the connector color

and number of pins.

2. After reinstalling the control box top cover

(before tightening screws) check that all

wires are inside control box top cover. No

wires should be pinched between the top

cover and range hood housing.

3. After the unit has been completely

reassembled run the hood and check all

functions.

4-9

LED Light Lamp Removal

NOTE

1. Cut off power to the hood unit.

2. The vent grill cover and filter assembly needs to

be removed before replacing LED light lamp. If

replacing the front panel LED light lamp then see

"Front Panel Removal" to remove front panel

before lamp replacement.

1． Hold the spring plate with index finger and

thumb and press the spring plate while pushing

the lamp LED light out of panel.