Atlantic Technology IWTS-7 LCR Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Altoparlanti Atlantic Technology IWTS-7 LCR. Atlantic Technology IWTS-7 LCR 8. Iwts series in-wall theater system speakers

Stampa la pagina

Instruction Manual

Mounting the IWTS Speakers

NoTE: We always recommend a professional be involved in the

installation of IWTS speakers.

The IWTS speaker can be easily mounted in most any standard wall mate-

rial, from ½ to 1½ inches thick. Its rotating wall clamps (sometimes called

"dog legs") firmly fix it to the wall surface after the proper cutout has been

made. Here are some important precautions to take before mounting:

Keep the sides of the actual mounting hole at least ½ inch away from

beams or studs to ensure that the clamps have adequate room to rotate.

A stud or other obstruction that's too close will stop them from properly

doing their job.

Installation of the IWTS in New

Construction

Atlantic Technology offers an optional Rough-in Frame Kit to ease installa-

tion in new construction. Instructions for its use are included with that kit.

Installation of the IWTS in Existing

Construction

Removing and Installing the Grille

Remove the grille from the speaker using an awl or the point of a drywall

screw in a grille opening near one of the grille corners. Slowly pry the grille

out, being careful not to damage the speaker's frame or its finish.

To re-install the grille later, press it carefully into the appropriate opening in

the frame assembly. Since it's designed to fit snugly, please take your time

and use care when installing the grille.

Cutting the opening

⁄

(418mm)

Center

⁄

(206mm)

IWCB-52/IWTS-7

Mounting Template

Mount frame as shown,

with IR knockout in

upper-right corner.

Remove scrim before

painting grille.

After determining the best location for the speaker as outlined above, use

the enclosed template to cut the proper size hole.

IWTS-7 LCR

IWTS-14 LCR

WARNING: Exercise extreme care before making any wall cuts to

ensure that you will not cut through any wires, pipes, or other items

that may be in the wall. You may sometimes, but not always, be able

to determine the approximate location of wires and pipes by looking

at the locations of nearby outlets and plumbing. But their location or

absence is never an assurance that there is not something within the

wall cavity.

Installation

⁄

" x 16 ½"

⁄

" x 17

⁄