Atlantic Technology 102 SB Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Subwoofer Atlantic Technology 102 SB. Atlantic Technology 102 SB 12. Sb-series box subwoofers
Anche per Atlantic Technology 102 SB: Scheda informativa sul prodotto (2 pagine)

Stampa la pagina
Atlantic Technology 102 SB Manuale di istruzioni
Instruction Manual

102 and 212 SB Subwoofer Rear Panel

Figure 1
1
2
3
4
5
6
7
8
Variable Level Control
1
Use this control to set the level of bass desired
Status LED
2
This will be green for "on" condition,amber for "standby"
Standby Switch
3
When in ON position,the amplifier will always be on.When in the
AUTO position, the amplifier will be in Automatic Standby Mode.
(pages 5 and 9)
Crossover Control
4
An adjustable (40Hz to 140Hz) @ 18dB per octave low-pass cross-
over.(pages 5 and 9)
Phase Switch
5
This switch allows precise acoustic matching with satellite speaker
systems whose output may be phase reversed.(pages 5 and 10)
Crossover Switch
6
When in the NORMAL position, adjustment of the crossover can
be made by the Crossover Control.If being fed a pre-filtered or THX
signal,place the switch at the BYPASS position.(pages 5 and 9)
BASS LEVEL
MIN
MAX
STATUS
ON
AUTO
STANDBY
60 Hz
CROSSOVER
FREQUENCY
40 Hz
140 Hz
PHASE
NORMAL
INVERT
CROSSOVER
NORMAL
BYPASS
RIGHT
L / MONO
OUTPUT
INPUT
CAUTION: FOR CONTINUED PROTECTION AGAINST
FOR 115V, USE T2AL 250V FUSE
FIRE, REPLACE ONLY WITH SAME TYPE 250V FUSE
FOR 230V, USE T1.25AL 250V FUSE
Low Level Output
7
The outputs allow daisy chaining of multiple subwoofers, or as a
return path back to the processor.(pages 5 and 6)
Low Level Input
8
Use the input to connect to the subwoofer or LFE line out from
your processor/receiver.(pages 5 and 6)
Product Serial Number
9
Write this number in the space provided on page 2 for future
reference.
Voltage Select Switch
10
Voltage switch for use in different countries.This switch will be set
when you receive the unit. Change this setting only when you are
sure your application requires it. For US, the switch should be set
to the 110-120V position.
On/Off Switch
11
Use this switch to turn the amplifier completely on or off.
AC Input
12
Use the included power cord to connect your amplifier to a wall
outlet.(pages 5 and 6)
Subwoofer Rear Panel
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
DOUBLE INSULATION - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
2001310
�������� ��
�� ��������
��������� ��
������� ����������
AC
INPUT
ON
3
9
10
11
12