Electrolux ICON E36WV100FS Manuale d'uso e manutenzione Istruzioni per l'installazione - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione Istruzioni per l'installazione per Cappa di ventilazione Electrolux ICON E36WV100FS. Electrolux ICON E36WV100FS 24. Electrolux ventilation hood installation instructions and use & care guide
Stampa la pagina
16
Installation
INSTALLING THE HOOD
NOTE
At least two people will be required to mount the hood.
1 Raise the hood into its mounting location.
2 Align the rectangular opening on the back of the hood with the wall-mounting
bracket. Gently lower the hood until it securely engages the bracket.
3 Make minor changes to the hoods horizontal and vertical position by adjusting
screws on the wall mounting brackets.
4 After the hood is level, secure the hood to the wall with (2) additional mounting
screws. Use drywall anchors provided if framing or studs are not available.
RECTANGULAR CUTOUTS
M O U N T I N G
BRACKETS
DRYWALL
ADDITIONAL MOUNTING
SCREWS
WOOD
FRAMING
Figure 9
INSTALL THE FLUE MOUNTING BRACKET
Secure the flue mounting bracket to the ceiling and wall using (4) 4.8 x 38mm mounting
screws and drywall anchors. Make sure the bracket is pushed into the corner, tight
against the wall and centered over the hood.
MOUNTING
BRACKET
HORIZONTAL
ADJUSTMENT
SCREW
VERTICAL
ADJUSTMENT
SCREW
Figure 10
DRYWALL
UPPER
ANCHORS
BRACKET
MOUNTING
SCREWS 4.8
x 38 mm
Figure 11