Electrolux LFG225S Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Cappa di ventilazione Electrolux LFG225S. Electrolux LFG225S 12.

Stampa la pagina

www.electrolux.com

Charcoal filter

6.2 Cleaning the grease filter

Filters are mounted with the use of clips

and pins on the opposite side.

To clean the filter:

1. Press the handle of the mounting clip

on the filter panel underneath the

hood (1).

2. Slightly tilt the front of the filter

downwards (2), then pull.

Repeat the first two steps for all filters.

3. Clean the filters using a sponge with

non abrasive detergents or in a

dishwasher.

The dishwasher must be set

to a low temperature and a

short cycle. The grease filter

may discolour, it has no

influence on the

performance of the

appliance.

4. To mount the filters back follow the

first two steps in reverse order.

Repeat the steps for all filters if

applicable.

6.3 Replacing the charcoal filter

WARNING!

The charcoal filter is NON-

washable! The filter cannot

be regenerated!

To replace the charcoal filter:

The time of saturation of the charcoal filter varies depending on the

type of cooking and the regularity of cleaning the grease filter. The

activated charcoal filter is not washable, cannot be regenerated

and must be replaced approximately every 4/6 months of operation,

or more frequently for particularly heavy usage.

1. Remove the grease filters from the

appliance.

Refer to "Cleaning the grease filter" in

this chapter.

2. Turn the filter counterclockwise (1)

and then pull (2).

To mount the filters back follow the steps

in reverse order.

In any case, it is necessary to replace

the filters at least every four months.

6.4 Replacing the lamp

WARNING!

Risk of burns and electric

shock! Disconnect the

appliance from the electricity

before the operation! Make

sure that the light bulb has

cooled down before touching

it.

WARNING!

Risk of injury! Use protective

gloves to replace the lamp.

Risk of damage to the

appliance! Do not use sharp

edged tools!

Replace the burnt light bulb in

accordance with the specifications:

Power (W)

Socket

E14