Atlantic Ultraviolet 10-0514A Installazione Funzionamento e manutenzione - Pagina 10

Sfoglia online o scarica il pdf Installazione Funzionamento e manutenzione per Sistemi di filtrazione dell'acqua Atlantic Ultraviolet 10-0514A. Atlantic Ultraviolet 10-0514A 16. Ultraviolet water purifiers

Stampa la pagina
L
I
AMP

NSTALLATION OR

120
50/60H
V
Z AND USING BALLAST NO
Figure 4 - Lamp Replacement for BIO-1.5
and BIO-3.0 (ballast no 10-0518A or 10-0514A)
Step 2 - Remove End-Cap
SAFETY EQUIPMENT REQUIRED TO PERFORM TASK
1.
WARNING: Disconnect power to water purifier, and remove ground connector from the chamber.
2.
Remove EASY-OFF
3.
Pull lamp cord and carefully withdraw lamp approximately 2 inches from chamber. While holding lamp
end, remove lamp socket from exposed lamp end.
4.
Carefully withdraw lamp from chamber. Be sure to withdraw lamp straight out without angling
until completely clear of quartz sleeve.
CAUTION: Lamp and quartz sleeve are easily damaged. Exercise care when handling.
5.
Reinstall lamp in reverse order.
WARNING: Germicidal ultraviolet rays are harmful to eyes and skin. Do not restore power to water purifier until
lamp and both EASY-OFF
10
R
BIO-1.5
EPLACEMENT
TM
end cap by pulling cap off static gland nut.
TM
end caps have been properly reinstalled.
BIO-3.0
AND
.10-0514A 230
50/60H
V
Step 3 - Remove Socket
.10-0518A
USING BALLAST NO
Z
Step 1 - Disconnect Power to Water
Purifier and Remove Ground Connector
Step 4 - Remove Lamp