Bosch 2 Manuale di istruzioni originale - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni originale per Aspirapolvere Bosch 2. Bosch 2 22. Mini blender
Anche per Bosch 2: Manuale di installazione rapida (16 pagine), Manuale per l'installazione e l'uso (18 pagine), Manuale di istruzioni originale (13 pagine), Manuale di istruzioni (32 pagine), Manuale d'uso (28 pagine), Manuale d'uso e istruzioni per l'installazione (16 pagine), Manuale di istruzioni (42 pagine), Manuale di istruzioni per l'uso (8 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (12 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (9 pagine), Manuale di istruzioni e istruzioni per l'installazione (36 pagine), Manuale d'uso e istruzioni per l'installazione (48 pagine), Manuale di istruzioni per l'uso (26 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso e istruzioni per l'installazione (24 pagine), Manuale di istruzioni (42 pagine), Informazioni per l'uso (28 pagine), Manuale d'uso (40 pagine), Manuale d'uso e istruzioni per l'installazione (35 pagine), Manuale d'uso (24 pagine)

Bosch 2 Manuale di istruzioni originale
OBJ_BUCH-412-001.book Page 31 Thursday, April 3, 2008 3:18 PM

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Dr. Eckerhard Strötgen
Senior Vice President
Head of Product
Engineering
Certification
17.03.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly

Delivery Scope

ANGLE EXACT 2 | 3 | 6 | 7 | 8 | 15 | 17 | 23 | 30
This industrial cordless angle wrenches are sup-
plied without application tools, angle head,
straight head, Ni-Cd battery pack, charger, con-
stant voltage regulator or voltage adapter. The
voltage adapters are to be used exclusively for
connection of Bosch industrial cordless angle
wrenches to the 4EXACT constant voltage regu-
lator.
ANGLE EXACT 14CF | 22CF | 29CF
These industrial cordless angle wrenches are
supplied without application tools, flat drive,
straight head, intermediate flange, Ni-Cd bat-
tery pack, charger, constant voltage regulator or
voltage adapter. The voltage adapters are to be
used exclusively for connection of Bosch indus-
trial cordless angle wrenches to the 4EXACT
constant voltage regulator.
Bosch Power Tools
ANGLE EXACT 7 – 900 | 10 – 650 | 14 – 420
These industrial cordless angle wrenches are
supplied without application tools, angled drive
head, straight drive head, Ni-Cd battery pack
and charger.
These power tools are not suitable for operation
with constant voltage regulator.
ANGLE EXACT 25 – 250 | 30 – 380 | 40 – 280 |
50 – 210
This industrial cordless angle wrenches are sup-
plied with angle head, but without application
tools, Ni-Cd battery pack and charger. These
power tools are not suitable for operation with
constant voltage regulator.

Operating and Storage Environment

The device is suitable exclusively for oper-
ation at enclosed work sites. For trouble-
free operation of the device, the allowed
ambient temperature should lie between – 5 °C
and +50 °C (23 °F and 122 °F) at an allowed
relative humidity of between 20 and 95 %, free
of dew.
In order to avoid damage to the battery cells,
the battery pack should be stored within a tem-
perature range between 0 °C (32 °F) and 45 °C
(113 °F).
Mounting the Angled Screw Head
ANGLE EXACT 2 | 3 | 6 | 7 | 7 – 900 | 8 |
10 – 650 | 14 – 420 | 15 | 17 |
23 | 30
On these industrial cordless angle wrenches, a
fitting angled screw head (see "Angled drive
head", page 30) has to be mounted first.
Make sure that the rotational direction
switch is in the middle position (switch-on
lock) or that the battery pack has been re-
moved from the power tool before mount-
ing a screw head, adjusting or dismounting.
Hold the power tool with the open-end spanner 6
by the spanner flats 5 of the angled head flange.
Never clamp the tool by the housing shells!
English | 31
3 609 929 B34 | (3.4.08)