Electrolux WHGL9040CN Manuale - Pagina 35

Sfoglia online o scarica il pdf Manuale per Cappa di ventilazione Electrolux WHGL9040CN. Electrolux WHGL9040CN 40.
Anche per Electrolux WHGL9040CN: Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale (21 pagine)

Stampa la pagina

Hood body installation

• Before attaching the hood body, tighten the

two screws Vr located on the hood body

mounting points.

• Hook the hood body onto the screws 12a.

• Fully tighten support screws 12a.

• Adjust screws Vr to level the hood body

Connection in Ducting Version

When installing the ducting version, connect

the hood to the chimney using either a flexi-

ble or rigid pipe ø 150 or 125 mm, the choice

of which is left to the installer.

To install a ø 150

• To install the dumper 10a.

• Fix the pipe in position using sufficient pipe

clamps (not supplied).

To install a ø 125

• To install a ø 125 mm air exhaust con-

nection, insert the reducer flange 9 on the

dumper 10a.

• To install the Adapting ring 10b.

• Fix the pipe in position using sufficient pipe

clamps (not supplied).

• Remove any activated charcoal filters.

Connection in Recycling Version

• Insert the connection extension pieces laterally

14.1 in connec-tion 15.

• Insert the Connector 15 into the Support bracket

7.3 and fix it with a screw.

• Make sure that the outlet of the extension pieces

14.1 is hori-zontally and vertically aligned with

the chimney outlets.

• Connect the air outlet connection 15 to the hood

body outlet using either a flexible or rigid pipe

ø 150 mm, the choice of which is left to the in-

staller.

• Ensure that the activated charcoal filters have

been inserted.

12a

ø 150

10b

10a

7.3

ENGLISH 35

ø 125

14.1

ø 150