Drill Master 61204 Manuale d'uso e istruzioni di sicurezza - Pagina 10
Sfoglia online o scarica il pdf Manuale d'uso e istruzioni di sicurezza per Sega Drill Master 61204. Drill Master 61204 16. 120 volt 6" cut-off saw
Anche per Drill Master 61204: Manuale d'uso e istruzioni di sicurezza (16 pagine)
Stampa la pagina
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
release the trigger and unplug the tool from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFOrE EacH uSE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. aFtEr uSE, wipe external surfaces
of the tool with clean cloth.
cut-Off Wheel Storage and Handling
1. Handle Cut-Off Wheels carefully to prevent
dropping or bumping. Do not use wheels
that have been dropped or bumped.
Page 10
For technical questions, please call 1-888-866-5797.
3. Periodically, wear ANSI-approved
safety goggles and NIOSH-approved
breathing protection and blow dust and grit out
of the motor vents using dry compressed air.
4.
WarninG! tO prEVEnt SEriOuS
inJury: if the supply cord of this power
tool is damaged, it must be replaced only
by a qualified service technician.
2. Store Cut-Off Wheels in shelves, racks, boxes, or
drawers. Storage area must be kept dry, and above
freezing. Any grinding or Cut-Off Wheels exposed to
humidity or freezing temperatures must not be used.
61204