Atlas AP-15TU Specifiche tecniche

Sfoglia online o scarica il pdf Specifiche tecniche per Altoparlanti Atlas AP-15TU. Atlas AP-15TU 2. Constant-directivity loudspeaker, ah series stadium loudspeakers, ah series subwoofer, professional omni-purpose loudspeakers, indoor / outdoor music loudspeaker
Anche per Atlas AP-15TU: Opuscolo (10 pagine)

Stampa la pagina

AP-15TU(C) Series

SPECIFICATIONS (UL RATING)

Models:

AP-15TU, AP-15TUC, AP-15TUCR

Power Rating:

15 Watts continuous

Frequency Response: 400-4,000 Hz

Sensitivity:

102dB at 15 watts, 10ft

(3dB increment UL Rating)

SPECIFICATIONS (ANECHOIC MEASUREMENTS)

Frequency Response: 400-14,000 Hz (Nominal)

500 - 6,000 Hz (± 5dB)

Sensitivity:

120dB at 15 watts (peak) / 1 Meter

116dB at 15 watts / 1 Meter (avg) 500-6,000 Hz

106dB 1 Watt / 1 Meter (avg) 500-6,000 Hz

Dispersion Angle:

70° (-6dB, 2000 Hz octave band)

Weight:

AP-15TU = 4.0 lbs (1.8kgs)

AP-15TUC(R) = 4.5 lbs. (2.0kgs)

Finish:

AP-15TU(C) = Grey baked epoxy

AP-15TUCR = Red baked epoxy

ARCHITECT AND ENGINEER SPECIFICATIONS

Voice control loudspeaker shall be Atlas Sound Model ______ (AP-

15TU, AP-15TUC, AP-15TUCR). Weather-resistant unit shall be con-

structed of heavy-gauge, treated aluminum. Loudspeaker shall be able

to operate within any ambient temperature environment ranging from

66°C (150°F) to -35°C (-30°F). Model shall be a double re-entrant type

with 15 watts RMS audio power rating compression driver producing a

UL-rated sound pressure level of 102dB measured at 15 watts, 10ft.

(3dB increment rating) within a frequency range of 400 Hz to 4 kHz.

Impedance shall be 8 ohms and sound dispersion 70°. Unit shall have

impedance selection via 7-position switch of 5000, 2500, 1300, 666,

333, 89 and 45 ohms. Power taps shall be available at 1, 2, 3.8, 7.5, 15

watts for 70V line and .48, .94, 1.8, 7.5, 15 watts for 25V line.

Loudspeaker assembly shall be furnished with mounting bracket allow-

ing adjustment on either a vertical or horizontal plane with a single lock-

ing pin and including provisions for mounting, banding, or strapping.

Wiring terminals for amplifier output shall be fully enclosed and a van-

dal-resistant adapter cover shall provide connection facilities for cable or

conduit. Dimensions: 7

⁄

" W x 8

⁄

Unit shall be finished in gray or red baked epoxy.

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

UL LISTED 15-WATT OMNI-PURPOSE

VOICE CONTROL LOUDSPEAKERS

" H x 9

⁄

" D (200 x 222 x 237mm).

1 6

Specifications subject to change without notice

Printed in U.S.A.

FEATURES

• 15-Watt High Efficiency Compression Driver

• Built-In Vari-Tap

Transformer for Easy Impedance Selection

• Optional 5 mfd Capacitor for Line Supervision

• Omni-Purpose Surface Mounting Bracket For Precise Positioning

• Vandal-Resistant, Weatherproof Construction

• Recommended for High Intelligibility Paging, Intercommunication,

and Signaling

APPLICATIONS

Atlas Sound's UL Listed AP Series loudspeakers are surface-mount-

ing, high-efficiency units for life safety and communication system

applications. When used with compatible control equipment, they pro-

vide high-intelligibility voice reproduction and signal transmission for

indoor or outdoor emergency alarm, protective signaling and intercom

system installations.

GENERAL DESCRIPTION

Atlas Sound AP Series Omni-Purpose loudspeakers are equipped

with a compression driver providing up to 15 watts RMS power

handling capability, superior intelligibility and dispersion to achieve

maximum sound projection and penetration.

Weather-resistant metal construction and re-entrant acoustic path

assure protection against water, humidity, vermin and corrosion. The

Omni-Purpose

mounting bracket allows directional sound dispersion

via vertical and horizontal positioning. Provisions are also included for

surface or strap mounting to pillars and I-beams.

All models include a built-in 25/70.7V Vari-Tap

a screw-driver adjustable, 7-position watt/impedance selection switch.

Wiring terminals are protected with a vandal-resistant adapter cover

for control equipment utilizing cable or conduit.

A built-in, 5 mfd capacitor is provided on Model AP-15TUC(R) for line

supervision. Model AP-15TU is not equipped with a capacitor.

All models meet or exceed the UL Listed standards for audible signal

appliances and are capable of operating within an ambient temp.

range of 66°C (150°F) to -35°C (-30°F). Models comply with UL

Standard 1480—Speakers for Fire Protective Signaling Systems and

California State Fire Marshal (Title 19). Models with special modifica-

tions to meet New York City MEA (Calendar no. 57-74-SA) and UL

Canada are also available as standard product. Contact Factory.

ACCESSORIES

BX-2A.

Vandal Resistant Cover Plate for Armored

Cable and Conduit Connection. Constructed

of Cast Aluminum.

APXB-G. Optional mounting base for a standard 1-gang

APXB-N. 2-gang, or 4" sq. E.O. box.

000501

AP-15TU

AP-15TUC

AP-15TUCR

transformer featuring

(G-Grey, N-Neutral)

131

SL2-1458