Atlas M1000 Istruzioni per l'installazione
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Altoparlanti Atlas M1000. Atlas M1000 1. Atlas sound sound masking loudspeaker assemblies specification sheet
Anche per Atlas M1000: Scheda tecnica (1 pagine), Istruzioni per l'installazione (1 pagine)
M1000
WIRING DIAGRAM AND HOOK-UP
STEP 1
Remove M1000 from package via hangers provided.
Hangers are factory installed to facilitate mounting of
the M1000 for upward sound dispersion, Figure 1.
This dispersion configuration is the most popular
and most effective.
If horizontal (side firing) dispersion is required, the
hangers may be re-located as shown in Figure 2.
If down firing dispersion is required, the hangers may
be relocated as shown in Figure 3.
STEP 2
Install the M1000 per Figure 1, 2 or 3, using hanger wire
(not included).
NOTE: Code requirements in many areas require the use of #12 suspension cable for
commercial applications. Check your local codes before installing the M1000.
STEP 3
Terminate service loop to the to the amplifier output line
(black is negative, red is positive) – see Figure 4.
NOTE: Strain relief is not designed to accommodate conduit. Use approved terminations
through the knock-outs provided on the M1000 cover plate when conduit is used.
STEP 4
Set tap selector switch to desired power setting.
Red "+" lead
5 Position Switch
Black "-" lead
MAGNET SENSITIVITY
MODEL LOUDSPEAKER
WEIGHT
M1000
8" (203mm)
Dual Cone
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2002 ATLAS SOUND LP
M1000 WIRING BLOCK DIAGRAM
Position 5=2W
Position 6=4W
FREQUENCY
RESPONSE
150Hz - 6kHz (±3dB)
10oz.
92dB
1W/1M
120Hz - 6.5kHz (±5dB)
(260g)
Specifications are subject to change without notice
Printed in U.S.A.
INSTALLATION INSTRUCTIONS
Figure 1
M1000 Shown w/hangers
located as configured
from factory for Upward
sound dispersion
Figure 3
M1000 Shown w/hangers
configured for Downward
sound dispersion
RED
WHITE
YELLOW
BLUE
.25W@25V
BROWN
.5W@25V
WHITE W/GREEN STRIPE
1W@25V
VIOLET
2W@25V
ORANGE
4W@25V
BLK
Transformer
SPECIFICATIONS
TRANSFORMER
TAPS @ 70.7V
.25, .5, 1,
2, 4
AtlasSound.com
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
001102
Figure 2
M1000 Shown w/hangers
configured for Horizontal
sound dispersion
8-OHM
+
-
8" Speaker
COM
ENCLOSURE
DIMENSIONS
VOLUME
11
9
⁄
"L x 11
9
⁄
"W x 5
1
⁄
"H
734 Cubic in.
1 6
1 6
2
(294 x 294 x 140mm)
ATS001449 RevB 11/02
Figure 4
WEIGHT
9lbs.
(3.4kg.)
PP