Atlas F6-MF Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Atlas F6-MF. Atlas F6-MF 16. Multi-impedance modular amplifier
Anche per Atlas F6-MF: Manuale d'uso (3 pagine)

Stampa la pagina
Atlas F6-MF Manuale d'uso
Owner's Manual

FM250 Amplifier Module Installation

Use the following steps and read all steps prior to installation.
1.
Turn F6-MF AC Power Switch to the "Off" position.
2. Turn down all level controls on the front panel.
3. Remove the blank card slot cover. Do not discard the two screws, you will need them later.
4. Set the function switches on the FM250 module. (See Page 10)
5. C arefully and slowly guide the module into the slot with the PCB components facing to the right. Note: The module heatsink
top and bottom metal edge mate with the mainframe plastic card guides. Do not force the card. Realign if necessary.
6. A fter the module is pushed in and in contact with the back plane of the PCB assembly mating connector, firmly press the
module in completing the connection. If the module plate is flush to the F6-MF , the module is fully seated.
7 .
Insert the two screws from the cover pate. Some minor alignment may be required.
Multi-Impedance Modular Amplifier
Align Modules to
Top & Bottom Card
Guides
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 11 –
Specifications are subject to change without notice.
F6-MF
AtlasSound.com