Atlas F6-MF Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Atlas F6-MF. Atlas F6-MF 16. Multi-impedance modular amplifier
Anche per Atlas F6-MF: Manuale d'uso (3 pagine)
Stampa la pagina
Owner's Manual
Thank you for purchasing the Atlas Sound F6-MF Multi-Impedance Modular Amplifier. The innovative design of the F6-MF allows
the amplifier to be configured to suit the individual amplification and sound system requirements of a variety of applications. This
functionality makes the F6-MF one of the most flexible, energy efficient amplifiers on the market today.
The F6-MF Chassis can be fitted with up to six uniquely engineered amplifier modules. The straight-path design of the F6-MF is the
essence of simplicity; yielding clean, accurate, and dynamic sound. The FM250-4 (4Ω/8Ω) and FM250-70 (70.7V) power modules
can be loaded into any of the six F6-MF amplifier card slots and are designed to deliver up to 250 Watts per channel. The Ultra Fast
Recovery Switch Mode power supply is routed to each output module through quad-ganged connector contacts to minimize the
impedance path allowing for maximum current delivery. Each amplifier module includes its own power supplied, high-current, low ESR
(Equivalent, Series Resistance) capacitors which provide immediate local, on demand current. This allows each channel to produce
clean, instantaneous, high-impact audio power. The direct coupled power supply is designed to route any and all available energy to
the channels that require it. This innovative feature known as Power Rail Direct Coupling™, or PRDC, technology enables channels that
demand more energy to benefit from the pooled resources so they can deliver more power efficiently.
The F6-MF Chassis can be purchased with up to six FM250-4 of FM250-70 modules in any combination. Additional modules can also be
ordered as needed to satisfy future system or purchasing requirements. The F6-MF and FM250 Power Modules are loaded with useful
features including Front and Rear channel status indicators, selectable gain, signal limiters, 100Hz Hi-Pass filter, bridge mode operation,
and tamper-resistant level controls.
The FM250 Series Power Modules are designed to be 90% efficient, allowing the amplifier to run cooler and consume less energy than
conventional commercial amplifiers. To ensure all channels run cool, Atlas Sound has designed the F6-MF with a sophisticated forced air
cooled tunnel system. The input design of the F6-MF is based on an open architecture concept, permitting application and installation
flexibility. Six balanced inputs via Phoenix termination feed a variety of optional accessory interface cards, increasing the functionality
and performance of the F6-MF .
The F6-MF offers an Energy Save Mode called "Standby". The amplifier can be turned on remotely via a Contact Closure (CC) or a
DC Voltage of 5V - 24V. An LED located on both the Front & Rear panels of the F6-MF indicates the operation mode of the amplifier.
While in Standby, the F6-MF draws an incredibly low amount of energy, 5 Watts, making the amplifier meet the Energy Star rating for
commercial products. In Activation mode, the F6-MF is designed for maximum power efficiency utilizing the most advanced topology
available. The FM Series Power Modules are 90% efficient, combining with the Power Savings Mode, making the F6-MF more power
efficient with a higher power handling than other commercial amplifiers available.
Additional input cards, i.e. FM-AMIX and FM-IPDSP , are also available to increase the flexibility of the F6-MF system. The cost effective
FM-AMIX Analog Input Mixer Card is feature loaded with stereo summed and Mic/Line inputs with global assignment and remote mute
priority capabilities. The FM-IPDSP Input Card incorporates the latest DSP and IP technologies to allow the user to adjust a wide array
of signal parameters, and it serves as an interface for control and system monitoring of all amplifier channels from a remote location.
All of these standard features and optional accessories make the F6-MF Multi-Impedance Modular Amplifier the ideal choice for the
demanding requirements of today's amplifiers.
Multi-Impedance Modular Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 5 –
Specifications are subject to change without notice.
F6-MF
AtlasSound.com