Atlas PM8CX Manuale di istruzioni per l'installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Sistema di altoparlanti Atlas PM8CX. Atlas PM8CX 7. Pedant mount loudspeakers 4" and 8"
Anche per Atlas PM8CX: Manuale di istruzioni per l'installazione (12 pagine), Opuscolo (2 pagine), Scheda tecnica (3 pagine), Manuale di istruzioni per l'installazione (19 pagine)

Troubleshooting

PROBLEM

There is no sound

Low sound level

Sound cuts in and out

Distortion at increased levels

Speaker makes "buzzing"

noise

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

PM Series

Pendant Mount Loudspeakers

POSSIBLE CAUSE

Power off. Equipment setting is wrong.

Volume set too low.

Loose connection.

Setting/volume control is set too low.

Connection is shorted or bad.

System overload/oscillation intermittent

connection.

Amplifier/speaker overdriven.

Hardware loose or speaker damaged.

REMEDY

Assure that power is applied to all equipment in system.

Check that routing (input/output) controls are set correctly.

Check that volume level is above minimum.

Check system from start to finish for crossed wires, loose

connection, etc. On the PM location check for correct

connection.

Check volume levels or amplifiers and related equipment

(equalizer). Check that connections aren't partially shorted/

corroded.

Check for overload condition or bad connection.

Check that power to speaker isn't over limits. Check that

amplifier isn't overdriven. Reduce power to amplifier slightly.

Make sure speaker grille is tight. Check other hardware

connections. Check speakers for loose parts or speaker

damage.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

7/7

AtlasSound.com