Alert 500S LCD Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Allarme auto Alert 500S LCD. Alert 500S LCD 13.

Stampa la pagina

. Once the system in car-jacking mode, If you are forced from the vehicle, the system will trigger

when the door is opened and closed while the ignition is " ON".

TrIGGEr THE ANTI CAr -JACKING MOdE:

a). 50 seconds after the system has been triggered. The siren will start chirping for 5

seconds.

b). During this 5 seconds period of chirping, you will be alerted to push the valet switch

once to turn off the car-jacking feature. If not, it will enter second timer car jacking.

c). 6 5 seconds after the system has been triggered. The siren starts alarming and the parking

light starts flashing.

d). 90 seconds after the system has been triggered

. The siren still alarming and the parking light flashing, and

. The starter disable will activate to prevent the vehicle from starting.

. It will remain active until the vehicle's battery power exhausted.

OVErrIdE THE SYSTEM TO TUrN OFF ANTI CAr- JACKING:

Turn the ignition switch from OFF to ON, and within 0 seconds push valet switch, the siren will

stop and the system disarmed

Note: If you use password pin code to double protect the vehicle security, you will need to use it to

completely disarm the system.

P. SYSTEM'S TRIGGER CHECK

(For two-way transceiver operation only)

Press the transceiver F button first, within seconds press (C)

button. It responds with one melody sound and all trigger's records will

immediately displayed on the LCD screen.

Q. SYSTEM'S STATUS CHECK

(For two-way transceiver operation only)

When you want to check the system's present status through the LCD

screen, Press the transceiver F button twice, within seconds press

be illuminated.

R. DRIVER PAGING

(For two-way transceiver operation only)

It is useful the event that someone wants to page the driver of the parked

vehicle.

Indoor driving paging

Under the ignition switch " off" condition, press and hold the valet switch for seconds to page the

driver, one chirp sound shall be emitted from the vehicle and the paging melody sound continues

you Remote LCD transceiver and "

" indication flashes on the LCD screen.

Outdoor driving paging

If someone tries to page you by tapping the paging (knock) sensor (optional) which is usually

mounted on the bottom part of front window, the paging melody sound continues sounding from

your Remote LCD transceiver and "

" indication flashes on the LCD screen.

. Press the transmitter F button first, within seconds press (≈) button to activate outdoor

driver paging function, It responds with chirps of the vehicle, a melody sound and "

indication flashes on the LCD screen to confirm the function is on.

. When tapping the paging (knock) sensor, one chirp sound shall be emitted from the vehicle

and the paging melody sound continues sounding from your Remote LCD transceiver and

" indication flashes on the LCD screen. Turn on the ignition switch; OR press the but-

ton to arm the system; OR press the button to disarm the system, this outdoor driver paging

function will exit.

S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION

The alarm with a unique feature which will turn on your vehicle dome light as following:

. Upon disarming, the interior lights will remain on for 0 seconds.

. If the vehicle is intruded, the interior light will flash for the same duration as the siren.

Note: Turn ON the ignition switch or arm the alarm will turn off the dome light.