Bose Acoustimass 20 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Bose Acoustimass 20. Bose Acoustimass 20 22. Powered speaker system
Anche per Bose Acoustimass 20: Manuale d'uso (22 pagine)

Stampa la pagina

Setting Up

Connecting the Acoustimass

Figure 15

Connecting the speakers to

your Model 20 music center

Figure 16

Setting up the remote control

module to the Model 20 music center

Note: To extend the length of the cables, use the supplied 50-foot extension cable (shown

in the dotted line above). This cable connects between the 30-foot audio input cable and the

3-foot VAR adapter cable (Figure 15).

To connect the Acoustimass 5 or 20 powered speakers to your system (Figure 15), follow

these steps:

1. Using the supplied 30-foot audio input cable, insert the round DIN connector into the

Acoustimass module, and the RCA plugs into the supplied 3-foot adapter cable labeled

VAR on the single-connector end.

2. Attach the end of the 3-foot VAR adapter cable to the ZONE 2 output jack on the rear of

the Model 20 music center.

Setting up the remote control

You need to set up a second remote control to operate the ZONE 2 outputs.

1. Remove the remote control battery cover and locate the miniature switches (Figure 16).

2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those on your first

remote.

3. Set switch 8 up for ZONE 2.

Connecting power to your system

CAUTION : If you purchased a dual-voltage system, it is important that you set the speakers

to the correct voltage. To do this, refer to "Selecting the correct voltage" on page 6.

Follow these steps to connect power to your Acoustimass powered speaker system:

1. Plug the power cord from the Acoustimass module into an AC power (mains) outlet.

2. Insert the power cords of the Lifestyle

3. Turn the Acoustimass module power switch to the On position.

December 20, 2001

system into an AC power (mains) outlet.

VAR

AM262838_00_V.pdf