Bose Acoustimass-20 Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Bose Acoustimass-20. Bose Acoustimass-20 22. Powered speaker system

Connecting

the Acoustimass

module

to the Lifestyle

s media

center

Figure

Connecdng me speakers

your Lifestyle

media center

Figure

Setting up a Zone 2 remote

control

FIX

,_ Note:

To extend the length of the cables, use the supplied 50-feet extension cable (shown in

the dotted line above). This cable connects between the 30-foot audio input cable and the 3-

foot FIX adapter cable.

To connect the Acoustimass 5 or 20 powered speakers to your system (Figure 13), follow

these steps:

1. Using the supplied 30-foot audio input cable, insert the DIN connector into the

Acoustimass module, and the RCA plugs into the supplied 3-foot adapter cable labeled

FIX on the single-connector end.

2. Attach the end of the 3-foot FIX adapter cable to the ZONE 2 output jack on the rear of the

Lifestyle media center.

Setting

up the

remote

control

You need to set up a second remote control to operate the ZONE 2 output.

1. Remove the remote control batter}/cover and locate the miniature switches (Figure 14).

2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those on your first

remote.

3. Make sure switches 5, 7, and 8 are up, and 6 and 9 are down.

Note: Refer to your Lifestyld _system owner's guide for more information on operating your

system in more than one room.

December 20, 2001

AM262838

00 Vpdf