Bose AmPlus 100 Manuale dell'installatore - Pagina 15

Sfoglia online o scarica il pdf Manuale dell'installatore per Altoparlanti Bose AmPlus 100. Bose AmPlus 100 20. Business music amplifier
Anche per Bose AmPlus 100: Manuale d'uso (10 pagine), Manuale d'uso (6 pagine)

Bose AmPlus 100 Manuale dell'installatore
Power output
Stereo: 65W per channel into 4
50W into 8
70V bridged mono: 100W into 49
100V bridged mono: 100W into 98
70V/4 : 50W @70V output into 98
65W @Ch2 output into 4
100V/4 : 50W @70V output into 196
65W @Ch2 output into 4
Input sensitivity
315mV required to drive both channels
to full power in any mode
Input attenuation
0dB to off
Input/Output configurations
1. 2-channel (stereo)
2. Mono into 4 load
3. Mono into 70/100V load
4. Dual-Mono (1 source/2 zones)
5. 2-channel (70/100V and 4 /Ch2)
Input impedance
32k balanced
11k unbalanced
Line output impedance
600
Line output distortion
0.1%
Frequency response
(active EQ bypassed)
4 outputs: 40Hz – 16kHz, 1dB
70/100V outputs: 60Hz – 16kHz, 1dB
THD @ rated power
4 outputs: 1% THD (40Hz – 16kHz)
70/100V outputs: 1% THD
(60Hz – 16kHz)
Hum and noise
Line outputs: 92dB
Pwr amp outputs: 80dB below maximum
output with 4 load
Controls
Inputs 1 and 2, input attenuation,
remote volume, bass adjust 1 and 2.
Input mode and amplifier mode switches.
Front panel power switch.
TM
AmPlus
100 Amplifier Specifications
LED indicator
Power: front panel
AC power consumption
120V~AC, 50/60Hz, 350W max
220-240V~AC, 50/60Hz, 350W max
Operating temperature range
(passively cooled, top and
bottom vents)
12º F to 120º F (-10º C to +50º C)
Special features
Remote volume control
Turn on/off muting
Clip detection and limiter
Short circuit protection
DC offset protection
Thermal limiting
Stable into reactive loads
RFI protection
International safety approvals under
UL-6500, CSA-E65, IEC-65
EMC CE compliance
Option card accessories
EQ cards (Model 8 loudspeaker, Model
25 loudspeaker, Model 32 loudspeaker,
and Model 1B Acoustimass
TM
402
loudspeaker, 502
®
802
loudspeaker)
Opti-Source
Opti-voice
Terminations
Inputs and outputs are quick
connect terminal blocks
Size
17"W x 10"D x 3
(43.2 x 25.4 x 9.5 cm)
(desk mount)
19"W x 10"D x 3
(48.3 x 25.4 x 9.5 cm)
(rack mount, chassis supported)
Weight
20 lb (9.1 kg)
Associated equipment
Rack mount kit
70/100V transformer
®
module,
®
loudspeaker,
TM
card
®
page card
3
"H
4
3
"H
4
15