Bose DesignMax DM3C Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Altoparlanti Bose DesignMax DM3C. Bose DesignMax DM3C 8. In-ceiling loudspeaker

Setup

Assembling the Tile Bridge

Note: If you are installing in a hard ceiling, assemble the tile bridge after inserting the rails and ring through the hole

cutout (see page 7).

Align the rails and insert the tabs into the slots.

Pull the rails outward to secure them together.

Align the rails parallel to each other and press the tile bridge ring down to secure the ring to the rails.

Note: Installation in close proximity to cooking surfaces where the loudspeaker may be directly exposed to cooking oils,

such as in commercial cooking environments, may decrease the performance or functionality of the loudspeaker.

Preparing Acoustic Ceiling Tile

Cutting the Ceiling Tile

Remove the tile and use the template to trace

a loudspeaker hole onto the tile. To center the

template on the tile, draw an X by connecting

the corners diagonally and center the template

using the crossing point.

Cut a hole into the tile.

Installing the Tile Bridge

Place the assembled tile bridge across the

ceiling grid. If necessary, adjust the tile bridge

so the rails rest on the ceiling grid.

Replace the tile in the ceiling.

6 • English

DesignMax DM3C • Installation Guide

PRO.BOSE.COM