Bose FreeSpace DS 100F Manuale di servizio - Pagina 15
Sfoglia online o scarica il pdf Manuale di servizio per Altoparlanti Bose FreeSpace DS 100F. Bose FreeSpace DS 100F 21. Square grille for loudspeakers
Anche per Bose FreeSpace DS 100F: Manuale di installazione (8 pagine), Manuale (2 pagine)
Stampa la pagina
DISASSEMBLY PROCEDURES
8. Transformer Removal
8.1 Perform procedure 7.
8.2 Remove the four screws (5) that secure
the transformer (17) to the enclosure. Lift
out the transformer.
8.3 Make a note of the wiring configuration
and cut the wires that connect to the cross-
over PCB assembly (9) as close to the board
as possible.
9. Loudspeaker Mounting Bracket
Removal
9.1 Using a Phillips-head screwdriver, re-
move the four screws (13) that secure the
mounting bracket to the back of the loud-
speaker.
9.2 Slide the bracket (12) and rubber grom-
met (15) away from the speaker. Slide the
bracket off of the rubber grommet.
FreeSpace
®
DS 100F Flush-Mount
Loudspeaker
Note: Refer to Figure 5 for the following
procedures.
1. Grille Removal
1.1 Using a small tool, such as an awl,
carefully pry the grille (2) away from the front
baffle (8). Lift off the grille.
2. Logo Removal
2.1 Perform procedure 1.
2.2 Slide the retaining washer (3) off of the
logo's post. Lift the logo (1) off of the grille
(2).
3. Tweeter Driver Removal
3.1 Perform procedure 1.
3.2 Using a Phillips-head screwdriver, re-
move the four screws (24) that secure the
2.25" driver (4) to the baffle (8).
3.3 Lift out the driver. Disconnect the two
Faston connectors from the tweeter's termi-
nal strip.
4. Woofer Removal
4.1 Perform procedure 1.
4.2 Using a Phillips-head screwdriver, re-
move the four screws (18) that secure the
woofer (19) to the baffle (8).
4.3 Lift out the woofer. Disconnect the two
Faston connectors from the woofer's termi-
nal strip.
15