Bose Lifestyle 48 Manuale di installazione - Pagina 21

Sfoglia online o scarica il pdf Manuale di installazione per Altoparlanti Bose Lifestyle 48. Bose Lifestyle 48 42. Personal music center ii - owner's guide
Anche per Bose Lifestyle 48: Manuale (29 pagine), Manuale di installazione (36 pagine), Manuale d'uso (25 pagine), Manuale d'uso (24 pagine), Manuale d'uso (13 pagine), Manuale di configurazione rapida (3 pagine), Manuale d'uso (30 pagine), Manuale di risoluzione dei problemi (32 pagine)

English

Español

Figure 16

Audio connection between

the Media center and TV

Setting the TV properly is important

Français

White

Audio cable with two

RCA connectors

Audio jacks for an auxiliary component, cable or satellite, and VCR

Note: You can make connections to your other components after you test this basic setup.

For information on how to make additional connections, refer to "Connecting other components

to the system" on page 29.

If your TV audio is connected to the media center, read the information below. If not, you may

want to skip to page 23.

To enjoy the full benefit of hearing TV audio through your LIFESTYLE

internal speakers in your TV should be turned off.

Your TV may include an on-screen audio menu with an option for turning the TV speakers on

or off. This menu may also provide an option for selecting a FIXED or VARIABLE audio output.

If possible, use FIXED for the highest sound quality. (For further information, refer to "Making

a video connection to the TV" on page 17.)

The following describes the most common ways to make these changes to your TV. Be sure

to refer to the owner's guide that came with your TV for instructions specific to your brand.

Newer TVs normally have a setup menu option for turning off speakers. Older TVs may have a

speaker on/off switch on the rear panel near the audio output jacks. Use the appropriate

instructions below.

Using your TV setup menu:

1. Using your TV remote, display the audio menu on your TV screen.

In most cases this can be done by pressing the Menu button and selecting Audio.

2. Locate the Speakers On/Off menu item and select Speakers Off.

3. Proceed to the next section for selecting FIXED audio output.

Red

ASIC

YSTEM

ONNECTIONS

White

Red

system speakers, the