Atlas Copco PH 240 D Istruzioni per la riparazione - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per la riparazione per Trapano Atlas Copco PH 240 D. Atlas Copco PH 240 D 8.

Mounting the

Press the ball bearing on the reduction

reduction gear

gear shaft (4) and secure it with the

shaft

locking ring.

Press the distance sleeve (5), the two

needle bearings, the spring plate (2), the

spring, the coupling sleeve, and the

coupling on the reduction gear shaft.

Mount the reduction gear shaft, the balls,

and the ring.

Fix the ring (3) to the reduction gear shaft

applying pressure, with aid of the

pressing-in tool No. 276 8000.

Mount the reduction gear inside the gear

case and fit the retaining ring. Only

applicable for "D"-models: Fit the sleeve

(1).

Fill in grease according to the lubrication

chart and mount the end bracket

(completely with the ball bearing).

Mounting the

Insert the cylinder sleeve into the machine

cylinder sleeve

and secure it with the screws (5).

Insert the percussion body (3). Mind the

right position!

Only applicable for "D"-models: Complete

and assemble the switch rod (2). Take

care that the lug of the switch rod grasps

the groove of the sleeve. Mount the switch

lever (1).

Mount the pillow block (4) provided for the

reduction gear shaft and the sleeve.

Mounting the

Insert the retaining ring, the washer (3), as

intermediate gear

well as the O-ring.

Insert the intermediate gear (1) and the

snap die (2) into the machine.

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE