Atlas Copco PHD 26 Istruzioni per la riparazione - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per la riparazione per Trapano Atlas Copco PHD 26. Atlas Copco PHD 26 8.

Assembly

Assembling the

Fix the switch (3), the capacitor (2), and

On/Off switch

the other electric parts with screws.

Mount the pair of handle shells (1).

Mounting the

Insert the electric field (3) into the motor

motor

housing (mind the right position!).

Insert the air conduction ring (2) and let it

engage.

Press on the eccentric, the bearing, the

ball bearing, the locking ring, and the

pinion (flush) with aid of a press and a

forcing disk.

Press the eccentric (7) in the gear box and

secure it with screws (the screws must be

covered with securing device). Insert the

sealing ring.

Half insert the piston (5) into the cylinder,

and insert the cylinder into the gear case.

At the same time hang up the connecting

rod in the eccentric wheel shaft. Secure

the cover (6) with screws.

Insert the armature (4) into the gear case.

If necessary, hit it lightly with a plastic

hammer.

Insert the gear case together with the

armature into the motor housing.

Fix the gear case to the motor housing

with screws. Fasten the screws

diagonally.

Re-assemble the pair of carbon brushes,

the retaining clip (8), and the carbon brush

holders (1).

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE