Atlas Copco PHE 3X Istruzioni per la riparazione - Pagina 10

Sfoglia online o scarica il pdf Istruzioni per la riparazione per Trapano Atlas Copco PHE 3X. Atlas Copco PHE 3X 14.

Assembling the

1 Connect all cables with the switch as

electrical parts

shown in illustration resp. wiring

diagram.

2 Push the field cables (6) through the

handle as shown in illustration.

3 Insert the switch (2), the capacitor (1),

the cooling plate with triac (3) (from date

of manufacture 03/96 into the provided

relief (7)) and take care that the cables

are fitted properly.

Lay the capacitor cable to the side of the

switch, and lay the field supply cables (6)

underneath the power supply cable in the

area of the strain relief.

4 Fasten the strain relief (4) with screws

(1 Nm).

Mounting the

handle

1 Screw the handle bolt (1) into the housing

(10 Nm).

2 Push the handle (6) over the bollt and fix

the AVS-rubber (4) with the washer and

the locking ring (5).

3 Insert the silicone buffer (3) into the

handle cover.

4 Fasten the handle cover (2) with the

screws (1,2 Nm).

5 Lead the field supply cables (8) through

the channels of the field housing (as

shown in illustration) and connect them

with the field (diagonally).

6 Fasten the handle with the bolt (7). Press

in the bolt or knock it in with a rubber

hammer.

2 1 3

Repair Instruction No. 175.8/95

PHE 3, PHE 3X

PAGE