Atlas Copco PHE 6 S Istruzioni per la riparazione - Pagina 15
Sfoglia online o scarica il pdf Istruzioni per la riparazione per Trapano Atlas Copco PHE 6 S. Atlas Copco PHE 6 S 18.
Stampa la pagina1
PHE 6 H:
Insert a new O-ring (C) into the retainer (5)
Assembling the
and fit the retainer to the barrel (B).
spindle sleeve
2
Grease the anvil (9) and fit two new seal
rings (8).
3
Fit the ring (7) and the rubber ring (6) to
the anvil (9).
4
Insert the anvil (9) into the driver (4).
5
Mount the spring ring (3).
6
Press the ball bearing (2) onto the driv-
er (4) and secure it with the spring ring (1).
1
PHE 6 H:
Grease the barrel (1) and screw down the
Assembling the
driver (2).
driver and the
2
Fix the service tool (4) in a vice (5).
barrel
3
Insert the barrel (1) and the driver into the
service tool and fasten the two with an Al-
len key (3) (30 Nm).
Take care that the seal rings are not
twisted.
Repair Instructions No.181.03/98
1
2
A
2
1
PHE 6 H / PHE 6 S
3
4
5
6
7
8
9
C
B
3
4
5
2
1
PAGE
14
9
10