Bose Virtually Invisible 791 series II Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Bose Virtually Invisible 791 series II. Bose Virtually Invisible 791 series II 14. In-ceiling speakers
Anche per Bose Virtually Invisible 791 series II: Manuale d'uso (8 pagine)
Stampa la pagina
Installing the Speakers
Installing the speaker
1.
Holding the outside edges, insert the speaker into
the hole.
Note: Do not press on the two small drivers on the face of
the speaker. This may damage the speaker.
Virtually Invisible
®
591 speaker
CAUTION: Certain forms of insulation (such as horse
hair plaster, newspaper, cellulose, or blown-in
materials) may pose a risk of ignition. Be sure
to keep all insulation away from the speakers.
2.
Tighten all the clamp screws with a Phillips
head screwdriver.
Note: If using a power drill, choose the lowest
torque setting.
Virtually Invisible
®
591 speaker
6 - English
Attaching the grille
The grille magnetically attaches to the rim of the speaker.
Place the grille on speaker.
Virtually Invisible
®
591 speaker
Painting the grille
You can paint the speaker grilles before you attach them to the
speaker. Bose
®
is not responsible for the quality of adhesion or
finish of non-factory-applied paints.
• Latex or oil-based architectural paint requires thinning for
use with a siphon-feed spray gun. Refer to the owner's guide
provided with your spray gun for guidelines.
• Be careful when using a sharp implement in the grille
perforations to remove a paint clog, which can damage
the grille.