Bose Sub1 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti Bose Sub1. Bose Sub1 14. Powered bass modules
Anche per Bose Sub1: Aggiornamento del firmware (4 pagine), Aggiornamento del firmware (44 pagine), Manuale di avvio rapido (6 pagine), Manuale (2 pagine)

Setup

Level

Adjust the level of audio output from the Sub. Begin with the Level Control set to a low setting and increase

the level until the Signal/Clip Indicator illuminates green. The Level Control does not affect the Line Outputs.

The 12 o'clock position is recommended when in use with an L1 Pro32. If using two Subs with a single L1 Pro, it

is recommended that the Level Control is set to the same position on both Subs.

Change the EQ of both Line Inputs by pressing the Line Input EQ button until the

corresponding LED for your desired EQ illuminates white. Use L1 to apply an input

EQ optimized for L1 Pro products; use LPF to apply a low-pass filter to the inputs.

When a Sub is connected to an L1 Pro32 with a SubMatch cable, the Line Input EQ

will be fixed to L1.

Change the EQ of both Line Outputs by pressing the Line Output EQ button

until the corresponding LED for your desired EQ illuminates white. Use FULL for

full frequency or HPF to apply a high-pass filter to the outputs.

Note: If using the Sub with an S1 Pro, press and hold the Line Output EQ button

for four seconds to enable an EQ specifically optimized for use with an S1 Pro.

The HPF LED will illuminate green. To deactivate the S1 Pro EQ, press and hold for

four seconds.

WARNING: Do not place the equipment in an unstable location. The equipment could become unstable

leading to a hazardous condition, which could result in injury.

CAUTION: Do not stack more than two Subs together. Only stack two Subs of the same model.

For horizontal configurations, adjust the logo by rotating it.

For stacked configurations, the Sub includes four interlocking feet that will attach to another

Sub of the same model. When stacking Subs horizontally, always make sure the feet lock

together before connecting power and sources.

Interlocking

feet

M20 insert

Interlocking

feet

10 • English

LINE IN EQ

LPF

LINE OUT EQ

FULL

HPF

Sub1/Sub2 Powered Bass Module • Owner's Guide

PRO.BOSE.COM

LINE IN EQ

LPF

LINE OUT EQ

FULL

HPF