Bose CineMate 130 Manuale d'uso - Pagina 30
Sfoglia online o scarica il pdf Manuale d'uso per Sistema Home Theatre Bose CineMate 130. Bose CineMate 130 50. Soundtouch series ii wireless adapter
Anche per Bose CineMate 130: Manuale d'uso (34 pagine), Manuale d'uso (6 pagine), Manuale d'uso (22 pagine), Manuale di avvio rapido (2 pagine)
Stampa la pagina
Care and Maintenance
Troubleshooting
Problem
What to do
No power
• Secure the Acoustimass
power cords.
• Reconnect the Acoustimass module's, soundbar's and console's power
cords firmly into an AC (mains) outlet.
• Use the remote control to power on the system.
• Factory reset the system (see page 32).
No sound
• Unmute the system.
• Increase the volume.
• Plug the Acoustimass module, soundbar and console into a live AC
(mains) outlet.
• Insert the speaker cable into the Speaker Connections connector, not
the Bose
• Insert the HDMI
Return Channel. If your TV does not have an HDMI ARC connector, use a
secondary audio cable in addition to the HDMI cable (see page 13).
• If using a secondary audio cable, insert the cable into a connector on your
TV labeled Output or OUT, not Input or IN.
• Secure all cable connections on the soundbar, TV and connected sources.
• If your source is connected to your TV, select the correct TV input
(see page 25).
• Disconnect headphones when not in use.
• If connecting your source through the
using the System menu (see page 27).
• If you are connecting headphones to the
Headphones using the System menu (see page 27).
• If you see the error message Cannot find Acoustimass, pair the
Acoustimass module with the console (see page 31).
• Factory reset the system (see page 32).
Sound is
• Insert the HDMI cable into a connector on your TV labeled ARC or
coming from
Audio Return Channel (if available).
your TV
• Turn off your TV speakers (refer to your TV owner's guide).
speakers
• Decrease your TV volume to its lowest setting.
Remote
• Match the + and – symbols on the batteries with the + and – markings
control is
inside the compartment (see page 18).
inconsistent
• Replace the battery (see page 18).
or does not
• Press the volume button on the remote control and see if the correct
work
source button flashes.
• If using CEC:
- Point the remote control at the console.
- Program the remote to control your source (see page 24).
• If you have programmed the remote to control your source:
- Point the remote control at the appropriate source.
- Ensure you have entered the correct code for your source's brand.
- Program the remote with another code (see page 24).
30 - English
®
module's, soundbar's and console's
®
Link connector.
™
cable into a connector on your TV labeled ARC or Audio
connector, enable Audio in
connector, enable