English
Dansk
Troubleshooting
Problem
What to do
Blinking red Status
• Disconnect the unit from the AC power outlet.
LED on either the
• Remove any possible obstruction to ventilation and reposition the unit upright with
SL2 transmitter or
receiver
• If it continues to blink red, check the cable connection between the SL2 receiver and
• If it continues to blink red, unplug the unit from the power outlet and contact Bose
No sound or
• Make sure the audio source is playing and the program selected includes surround
intermittent sound
• Check to be sure both the SL2 transmitter and receiver power packs are properly
• Make sure that cables are properly connected to the SL2 transmitter, the Acoustimass
• Make sure the SL2 transmitter and receiver are no less than 6
• Locate the small opening labeled Reset on the bottom of both the SL2 transmitter and
• Move the receiver, the transmitter, or both so the transmission path between them
Interference with a
• Increase the distance from each SL2 unit to the phone.
wireless (5.8GHz)
• Press the channel button on the phone (if one is provided) to choose a different
phone
Contacting Customer Service
For additional help in solving problems, contact Bose Customer Service. Refer to the address
sheet included in the carton.
Deutsch
Español
clear space around the ventilation openings on each side. If the ventilation was
obstructed, allow the unit a few minutes to cool before reconnecting it to the AC power
outlet.
the surround speakers. Make sure the connections are secure and the cable wires are
not touching each other, which can cause a short circuit. Refer to "Connecting the SL2
receiver" on page 7. Reconnect the unit to the AC power outlet.
Customer Service. Refer to the address list included in the SL2 carton.
sound audio.
plugged into functioning AC power outlets. Refer to "Making the connections" on
page 6.
module, the SL2 receiver, and the surround speakers. The connectors must be
inserted securely in the jacks.
more than 30 feet (9.2 meters) apart.
the SL2 receiver. Using a fine-pointed tool (like a straightened paper clip), press inside
the opening on the transmitter. And, within 30 seconds, in the same way press inside
the opening on the receiver.
does not intersect with large metal objects in your room or other obstructions (like a
fish tank full of water).
channel for phone transmissions.
Français
Italiano
Y
SL2
OUR
Nederlands
Svenska
WIRELESS SURROUND LINK
®
®
1
/
feet (2 meters) and no
2
9
Stampa la pagina