Bose SOUNDTOUCH 300 Manuale d'uso - Pagina 45

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Bose SOUNDTOUCH 300. Bose SOUNDTOUCH 300 50. Universal remote control
Anche per Bose SOUNDTOUCH 300: Manuale di configurazione (16 pagine), Manuale di avvio rapido (40 pagine), Manuale di avvio rapido (31 pagine), Manuale di configurazione (24 pagine), Faq (4 pagine), Faq (3 pagine)

If you experience problems with your soundbar:

• Connect the soundbar and optional bass module or surround speakers to

AC (mains) power.

• Secure all cables.

• Verify the state of the system status indicators (see page 36).

• Move the soundbar and optional bass module or surround speakers away from

possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).

• Move the soundbar within the recommended range of your wireless router or mobile

device for proper operation.

• Place the soundbar according to the placement guidelines (see page 10).

If you could not resolve your issue, see the table below to identify symptoms and

solutions to common problems. If you are unable to resolve your issue, contact Bose

customer service.

The following table lists symptoms and possible solutions to common problems.

Symptom

No HDMI™ ARC or

optical connector on

your TV

No power

Remote control is

inconsistent or does

not work

Solution

• Connect to your TV using an audio converter and separate audio

cable, such as a coaxial, 3.5 mm or analog stereo cable (not

provided). The type of converter and cable you need depends on the

audio output connectors available on your TV.

• Unplug the power cords for the soundbar and optional bass module

or surround speakers, wait 15 seconds and plug them firmly into a

live AC (mains) outlet.

• Use the remote control to power on the soundbar (see page 16).

• Point the remote control at the soundbar, making sure that there are

no objects in the way.

• Match the + and – symbols on the batteries with the + and –

markings inside the compartment (see page 16).

• Replace the batteries (see page 16).

• Press the volume button on the remote control and see if the correct

source button flashes.

• If you have programmed the remote control to control your source:

– Point the remote control at the appropriate source.

– Make sure you have entered the correct code for your source's

brand.

– Program the remote control with another code (see page 22).

T R O U B L E S H O O T I N G

E N G L I S H - 4 5