Bose SoundTouch Stereo JC series II Manuale d'uso - Pagina 23
Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Bose SoundTouch Stereo JC series II. Bose SoundTouch Stereo JC series II 36. Wi-fi music system
Anche per Bose SoundTouch Stereo JC series II: Manuale di avvio rapido (2 pagine)
Stampa la pagina
Performing the ADAPTiQ
What you need:
ADAPTiQ
headset
®
The ADAPTiQ
audio calibration system customizes the sound of your system to
®
the acoustics of your listening area.
Note: You must complete SoundTouch
calibration. See "Adding the system to your Wi-Fi
To perform a calibration, you need about ten minutes when the room is quiet.
While wearing the special headset, the system prompts you to sit in five different
locations in your listening area as the system takes measurements in each one.
Audio prompts from the system guide you through the process.
1.
Plug the ADAPTiQ
of the Acoustimass
and white-to-white.
Note: Make sure that your system is powered on.
ADAPTiQ
headset
2.
Put the headset on your head so the left and right sensors rest above your
ears. This headset allows the system to hear exactly what you hear.
SoundTouch
headset into the Audio IN connectors in the back
®
module. Be sure to match the colors, red-to-red
®
Right (R, red)
Left (L, white)
®
calibration
®
controller
™
setup before performing ADAPTiQ
™
®
ADAPTiQ
network" on page 11.
English - 23
®
audio
®