Bose FreeSpace ZA 2120-HZA Manuale di installazione e funzionamento - Pagina 29
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Amplificatore Bose FreeSpace ZA 2120-HZA. Bose FreeSpace ZA 2120-HZA 48. Integrated / zone amplifiers
Stampa la pagina
- 1. Table of Contents
- 2. Freespace® Iza 2120-Lz / Iza 2120-Hz Integrated Zone Amplifier
- 3. Iza 2120-Lz Rear Panel
- 4. Za 2120-Lza/Hza Rear Panel
- 5. Remote Volume Control
- 6. Connecting the CC-1 to a Freespace® Amplifier
- 7. Connecting an Iza 2120-Lz/Hz Amplifier to a Za 2120-Lza/Hza Amplifier
- 8. Troubleshooting
pro.Bose.com
ZA 2120-HZ remote configuration examples
Configuration example #1:
REMOTE 1 can be a Bose® volume control user interface accessory (PC 041966). REMOTE 1 will control the
level of both outputs simultaneously. This configuration requires setting the REMOTE 1 CONTROL switch
to ZONE 1+2. If only one remote is being used, this switch must be set to ZONE 1+2. If this switch is set to
ZONE 1, the REMOTE will not operate.
Bose
1
PWR
volume
control
2
VOL
Configuration example #2:
REMOTE 1 and REMOTE 2 can be a volume control user interface accessory (PC 041966). In this
configuration, REMOTE 1 controls the level of output one and REMOTE 2 controls the level for output two.
This configuration requires setting the REMOTE 1 CONTROL switch to ZONE 1.
Bose
1
PWR
volume
2
VOL
control
ZA 2120-HZ
Remote input functionality
The amplifier also can be controlled with a linear taper 10k ohm potentiometer (fully CCW = 0 ohm,
fully CW = 10k ohm) and SPDT switch. When the SW1 switch is set to short the A/B pin to the COM pin,
the amplifier switches to input A. When the SW1 switch is set to make the A/B pin open, the amplifier
switches to input B.
ZA 2120-HZ
REMOTE 1
REMOTE 1
Switch setting
REMOTE 1
CONTROL
ZONE 1
ZONE 1+2
Bose
1
PWR
volume
2
VOL
control
ZA 2120-HZ
Installation
Switch setting
REMOTE 1
CONTROL
ZONE 1
REMOTE 2
ZONE 1+2
Installation Guide - 29